Make sure this part fits

GM 25936860
Negative Cable

2007-2017 GM

Customer Questions & Expert Answers (14)
GM 25936860 Negative Cable
  • Part Description
    Cable Assembly-Battery Negative; Battery Cables; Ground Strap
  • Replaces
    25808196
  • Manufacturer
    General Motors
Make sure this part fits
$34.54 MSRP: $64.86
You Save: $30.32 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25936860
    Part DescriptionCable Assembly-Battery Negative; Battery Cables; Ground Strap
    Other NamesCable, Battery Negative And Engine Ground; Cable, Battery Ground(Negative)
    Item Dimensions8.5 x 3.1 x 3.2 inches
    Item Weight0.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25808196
    ManufacturerGeneral Motors
    SKU25936860
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2017 Buick EnclaveBase, Convenience, CX, CXL, Leather, Premium6 Cyl 3.6 L GAS
    2009-2017 Chevrolet TraverseLS, LT, LTZ, Premier6 Cyl 3.6 L GAS
    2007-2016 GMC AcadiaDenali, SL, SLE, SLT6 Cyl 3.6 L GAS
    2017 GMC Acadia LimitedBase6 Cyl 3.6 L GAS
    2007-2010 Saturn OutlookXE, XR6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25936860 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25936860 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the process for installing the negative battery cable for the 2010 Buick Enclave? Posted by Customer
    A:
    Position and install the negative battery cable to the battery negative terminal, then tighten the negative battery cable terminal nut to 9 Nm (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be attached to the left upper engine compartment support bracket for the 2009 Buick Enclave? Posted by Customer
    A:
    Attach the battery negative cable extension cable clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What clips need to be attached during installation for the 2010 Buick Enclave? Posted by Customer
    A:
    Attach the battery negative cable extension cable clip to the left upper engine compartment support bracket and clip to the front compartment side rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after removing the air cleaner assembly for the 2008 Buick Enclave? Posted by Customer
    A:
    Detach the engine wiring harness from the battery negative cable extension cable clip and remove the battery negative cable extension cable ground bolt from the cylinder head.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the first step in the installation process for the 2009 Buick Enclave? Posted by Customer
    A:
    Install the new battery positive junction block cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the final step in the installation process for the 2010 Chevrolet Traverse? Posted by Customer
    A:
    Connect the positive battery cable terminal to the junction block stud, install the accessory wiring junction block nut and tighten it to 22 Nm (16 lb ft), close the junction block cover, and install the positive battery cable clip to the multiuse relay bracket. Finally, reinstall the fuel injector sight shield and reconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after installing the ground bolt for the 2008 GMC Acadia? Posted by Customer
    A:
    Connect the body wiring harness electrical connector to the negative battery cable electrical connector and finally connect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be removed after disconnecting the negative battery cable for the 2010 GMC Acadia? Posted by Customer
    A:
    Remove the fuel injector sight shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What do you do after removing the fuel injector sight shield for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    Open the accessory wiring junction block cover and remove the junction block nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be considered when using replacement cables for the 2009 GMC Acadia? Posted by Customer
    A:
    Always use replacement cables that match the type, diameter, and length of the original cables.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after disconnecting the negative battery cable for the 2007 GMC Acadia? Posted by Customer
    A:
    Open the accessory wiring junction block cover and remove the accessory wiring junction block nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What clips need to be attached during installation for the 2007 GMC Acadia? Posted by Customer
    A:
    Attach the battery negative cable extension cable clip to the left upper engine compartment support bracket and clip to the front compartment side rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What are the final steps to complete the installation for the 2007 GMC Acadia? Posted by Customer
    A:
    Reposition the passenger side corner of the dash panel sound barrier, install the passenger side carpet, and the right side instrument panel insulator panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25936860, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25936860 Negative Cable. It is sometimes referred to as GM Battery Cable. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25936860 Negative Cable. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery