Make sure this part fits

GM 18026210
Overhaul Kit, Front

1998-2005 GM

Customer Questions & Expert Answers (8)
GM 18026210 Overhaul Kit, Front
  • Part Description
    Caliper Kit, Front Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1998-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1998-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1999-2005 Pontiac Grand AmGT, GT1, SE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 18026210 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18026210 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the brake caliper piston for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Use low pressure compressed air directed into the caliper bore through the fluid inlet hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you remove the brake caliper for the 2005 Chevrolet Classic? Posted by Customer
    A:
    Remove the brake caliper bolts, possibly using a wrench to hold the brake caliper pin, and take out the 2 guide pins from the caliper mounting bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be used to clean the brake caliper piston bore and seal counterbore for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Denatured alcohol or an equivalent, then dry them with non-lubricated, filtered air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What tool can be used to extract the piston seal for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Use a small wooden or plastic tool to extract the piston seal from the groove in the caliper bore.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you create clearance between the linings and the rotor for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Use a large C-clamp to push the piston into the caliper bore, slowly tightening the clamp until the piston is sufficiently retracted to slide the caliper assembly off the rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done if light rust or corrosion is found for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Attempt to remove it with fine emery paper; if it cannot be removed, replace the caliper assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after inspecting the fluid level for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Overhaul Kit, Front 18026210 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18026210 Overhaul Kit, Front is available in the market under the name GM Brake Caliper Repair Kit, Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18026210 Overhaul Kit, Front fits certain Chevrolet Malibu, Classic models, as well as Pontiac Grand Am. Additionally, it is compatible with Oldsmobile Cutlass, Alero models.
The original GM component designated by manufacturer part number 18026210 maintains top performance when functioning as the Caliper Kit, Front Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit unit at its Front. The component 18026210 is constructed from durable material and its dimensions span 3.1 x 3.1 x 1.6 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper Kit, Wheel Brake Cylinder/Caliper. The part 18026210 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 18026210. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.