Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19133369
Wheel Cylinder

2005-2008 GM

Customer Questions & Expert Answers (8)
GM 19133369 Wheel Cylinder
GM 19133369 Wheel Cylinder
GM 19133369 Wheel Cylinder
  • Part Description
    Cylinder Kit, Wheel Brake Cylinder/Caliper; Wheel Cylinder Repair Kit
  • Position
    Rear
  • Replaces
    89059126
  • Manufacturer
    General Motors
Make sure this part fits
$47.69 MSRP: $85.16
You Save: $37.47 (44%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 2008 Chevy Silverado 3500 HD Wheel Cylinder Diagram for 19133369
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19133369

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2008 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2005-2008 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2005-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007-2008 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2005-2008 GMC Sierra 1500Base, Denali, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19133369 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19133369 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wheel cylinder on Chevrolet Silverado 3500? Posted by Customer
    A:
    You must take off the brake shoes before disconnecting the Brake Line from the Wheel Cylinder. Seal its Brake Line fitting to block fluid from entering. Take away the Wheel Cylinder bolts and pull out the Wheel Cylinder. Set the new Wheel Cylinder correctly and tighten the Wheel Cylinder bolts to 18 nm (13 ft. Lbs.). Detach the Brake Line plug or cap and join the Brake Line to the Wheel Cylinder before tightening the fitting at 19 nm pressure. Fitting new brake shoes should be followed by examining the master cylinder forfluid before adding more fluid if needed.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wheel cylinder on Chevrolet Silverado 1500? Posted by Customer
    A:
    The Wheel Cylinder needs to be replaced following these steps: take out the brake shoes and attach a plug to the Brake Line fitting before detaching it from the Wheel Cylinder. Take off the Wheel Cylinder bolts and pull out the Wheel Cylinder from its space. Put the new Wheel Cylinder into its correct place and bolt it on securely at 18 nm torque (13 ft. Pounds). Press the Brake Line fitting cap aside before linking the Brake Line to the Wheel Cylinder and tightening it at 19 nm (14 ft. Lbs). Place the new brake shoes before you drain and fill the brake system to check and adjust master cylinder fluid.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wheel cylinder on Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    You need to take out the brake shoes before disconnecting the Brake Line from its Wheel Cylinder fitting. Cap or plug the Brake Line end to keep brake fluid safe. You must take out the Wheel Cylinder by first removing its bolts. Put the new Wheel Cylinder properly in place and use a torque wrench to install its bolts at 18 nm (13 ft-lbs). Insert the Brake Line fitting into the Wheel Cylinder slot and fasten the connection at 19 nm (14 foot pounds). Replace the brake shoes at the rear while performing brake bleeding and checking the master cylinder fluid level plus topping it up with fluid if needed.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wheel cylinder on Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    You need to take out the brake shoes before disconnecting the Brake Line from its Wheel Cylinder fitting. Cap or plug the Brake Line end to keep brake fluid safe. You must take out the Wheel Cylinder by first removing its bolts. Put the new Wheel Cylinder properly in place and use a torque wrench to install its bolts at 18 nm (13 ft-lbs). Insert the Brake Line fitting into the Wheel Cylinder slot and fasten the connection at 19 nm (14 foot pounds). Replace the brake shoes at the rear while performing brake bleeding and checking the master cylinder fluid level plus topping it up with fluid if needed.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wheel cylinder on GMC Sierra 3500? Posted by Customer
    A:
    The Wheel Cylinder needs to be replaced following these steps: take out the brake shoes and attach a plug to the Brake Line fitting before detaching it from the Wheel Cylinder. Take off the Wheel Cylinder bolts and pull out the Wheel Cylinder from its space. Put the new Wheel Cylinder into its correct place and bolt it on securely at 18 nm torque (13 ft. Pounds). Press the Brake Line fitting cap aside before linking the Brake Line to the Wheel Cylinder and tightening it at 19 nm (14 ft. Lbs). Place the new brake shoes before you drain and fill the brake system to check and adjust master cylinder fluid.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wheel cylinder on GMC Sierra 1500? Posted by Customer
    A:
    The Wheel Cylinder needs to be replaced following these steps: take out the brake shoes and attach a plug to the Brake Line fitting before detaching it from the Wheel Cylinder. Take off the Wheel Cylinder bolts and pull out the Wheel Cylinder from its space. Put the new Wheel Cylinder into its correct place and bolt it on securely at 18 nm torque (13 ft. Pounds). Press the Brake Line fitting cap aside before linking the Brake Line to the Wheel Cylinder and tightening it at 19 nm (14 ft. Lbs). Place the new brake shoes before you drain and fill the brake system to check and adjust master cylinder fluid.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wheel cylinder on GMC Sierra 1500 Classic? Posted by Customer
    A:
    You need to take out the brake shoes before disconnecting the Brake Line from its Wheel Cylinder fitting. Cap or plug the Brake Line end to keep brake fluid safe. You must take out the Wheel Cylinder by first removing its bolts. Put the new Wheel Cylinder properly in place and use a torque wrench to install its bolts at 18 nm (13 ft-lbs). Insert the Brake Line fitting into the Wheel Cylinder slot and fasten the connection at 19 nm (14 foot pounds). Replace the brake shoes at the rear while performing brake bleeding and checking the master cylinder fluid level plus topping it up with fluid if needed.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wheel Cylinder 19133369 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19133369 Wheel Cylinder is available in the market under the name GM Wheel Cylinder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19133369 Wheel Cylinder fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 3500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 3500 models.
The original GM component designated by manufacturer part number 19133369 maintains top performance when functioning as the Cylinder Kit, Wheel Brake Cylinder/Caliper; Wheel Cylinder Repair Kit unit at its Rear. The component 19133369 is constructed from durable material and its dimensions span 4.1 x 3.1 x 3.1 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19133369 has available replacement options 89059126. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.