Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 9240163
Inlet Pipe

1997-2005 GM

Customer Questions & Expert Answers (7)
GM 9240163 Inlet Pipe
GM 9240163 Inlet Pipe
GM 9240163 Inlet Pipe
GM 9240163 Inlet Pipe
GM 9240163 Inlet Pipe
GM 9240163 Inlet Pipe
  • Part Description
    Pipe, Engine Oil Cooler Outlet
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 9240163 Inlet Pipe is Ref No. 40 in the diagram below

    2002 Saturn Vue Inlet Pipe Diagram for 9240163
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 9240163

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2004 Cadillac CTSBase, Luxury, Luxury Sport6 Cyl 3.2 L GAS
    1997-2001 Cadillac CateraBase, Sport6 Cyl 3.0 L GAS
    2001-2005 Saturn L3002, 3, Base6 Cyl 3.0 L GAS
    2000 Saturn LS2Base6 Cyl 3.0 L GAS
    2000 Saturn LW2Base6 Cyl 3.0 L GAS
    2001-2003 Saturn LW300Base6 Cyl 3.0 L GAS
    2002-2003 Saturn VueBase6 Cyl 3.0 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Hey, is 9240163 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 9240163 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the coolant pipe in the intake system on Cadillac Catera? Posted by Customer
    A:
    For you to replace the Coolant Pipe in the intake system, you must first drain the engine coolants. Next, remove the transmission. Then, remove heater core bypass hose, the coolant intake pipe hose, the radiator outlet hose and the support bolt and bolts. Pull the coolant intake pipe rearward underneath the front of the cowl to disengage it, and after that, extract the intake pipe seal. For installation, first, mount the coolant intake pipe seal and slide the coolant intake pipe under the front of cowl in the proper mounting position. Mount the coolant intake pipe bolts and tighten down to 20 nm (15 ft. Lbs.), followed by the coolant intake pipe support bolt at 20 nm (15 lb-ft), and then reconnect the radiator outlet hose, the coolant intake pipe hose, and the heater core bypass hose. Finally, reinstall the transmission and top up with the cooling fluids.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2004 Cadillac CTS? Posted by Customer
    A:
    Reinstall the wiper motor module and fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after positioning the coolant intake pipe for the 2001 Cadillac Catera? Posted by Customer
    A:
    Install the coolant intake pipe bolts and tighten them to 20 Nm (15 ft. lbs.), followed by the coolant support intake bolt tightened to 20 Nm (15 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after preparing the O-ring seals for the 2004 Cadillac CTS? Posted by Customer
    A:
    Install the O-ring seals around the coolant outlet pipe grooves.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after removing the fittings for the 2003 Cadillac CTS? Posted by Customer
    A:
    Remove the oil cooler lines from the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What is the first step to replace the surge tank hose/pipe for the 2003 Cadillac CTS? Posted by Customer
    A:
    First, drain the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Inlet Pipe 9240163 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 9240163 Inlet Pipe is available in the market under the name GM Cooling Hose, Oil Cooler Hose, Coolant Pipe. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 9240163 Inlet Pipe fits certain Cadillac CTS, Catera models, as well as Saturn Vue, L300, LS2 models.
The original GM component designated by manufacturer part number 9240163 maintains top performance when functioning as the Pipe, Engine Oil Cooler Outlet unit. The component 9240163 is constructed from durable material and its dimensions span 3.1 x 13.3 x 12.6 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Oil Line; Outlet Pipe; Pipe, Engine Oil Cooler. The part 9240163 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.