Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15041706
Window Regulator, Front Driver Side

1994-2005 GM

Customer Questions & Expert Answers (8)
GM 15041706 Window Regulator, Front Driver Side
  • Part Description
    Regulator, Front Side Door Window
  • Position
    Front Driver Side
  • Replaces
    15705141
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 1995 Chevy S10 Window Regulator, Front Driver Side Diagram for 15041706
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15041706

  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1994-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1994-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15041706 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15041706 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front door window regulator on Chevrolet S10? Posted by Customer
    A:
    The front door Window Regulator replacement starts by removing the window before disconnecting the power Window Motor electrical connector when present. The next step is to remove electrical harness retainers if they exist after drilling out the rivets that connect the Window Regulator to the door. The first step after extracting the door Window Regulator involves removing the power Window Motor when equipped. The installation process starts with power Window Motor installation if present then continuing with Window Regulator attachment to the door. Proceed by using the rivet gun (J 34940) for installing rivets which will secure the Window Regulator to the door before linking the electrical connector and the electrical harness retainers if equipped while finishing the window installation.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front side door window regulator on GMC Jimmy? Posted by Customer
    A:
    The replacement of the front side door Window Regulator begins with removing the window from the door assembly. Start by disconnecting the power Window Motor electrical connector when present and taking out the harness retainers whenever they exist. You must use a drill to remove the rivets securing the Window Regulator to the door before taking out the regulator itself from the door. The first step is to take out the power Window Motor when it exists. The power Window Motor installation must precede Window Regulator attachment to the door for replacement. The Window Regulator attachment to the door needs secure rivets that should be installed using the rivet gun j 34940. Install the window after connecting the electrical connector together with any electrical harness retainers that may be present.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the final steps after installing the window regulator for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Reinstall the electrical harness retainers, connect the power window motor electrical connector, if applicable, and finally, reinstall the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be done after installing the power window motor for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Install the window regulator to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the first step to replace the rear door power window regulator for the 2000 GMC Jimmy? Posted by Customer
    A:
    First, remove the window and disconnect the power window motor electrical connector, if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the first step to replace the front door window regulator for the 2004 GMC Sonoma? Posted by Customer
    A:
    Remove the window and disconnect the power window motor electrical connector, if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    How do you install the window regulator and motor assembly for the 2001 GMC Jimmy? Posted by Customer
    A:
    Position the window regulator and the motor assembly back into the door, then secure the window regulator using the rivets with the J 34940 Rivet Gun (J 34940).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Regulator, Front Driver Side 15041706 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15041706 Window Regulator, Front Driver Side is available in the market under the name GM Window Regulator. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15041706 Window Regulator, Front Driver Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15041706 maintains top performance when functioning as the Regulator, Front Side Door Window unit at its Front Driver Side. The component 15041706 is constructed from durable material and its dimensions span 3.1 x 29.1 x 14.6 inches while weighing 4.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Regulator; Regulator, Door And End Gate Window. The part 15041706 has available replacement options 15705141. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.