Make sure this part fits

GM 26055049
Axle Assembly, Front Passenger Side

1997-2005 GM

Customer Questions & Expert Answers (11)
GM 26055049 Axle Assembly, Front Passenger Side
  • Part Description
    Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle
  • Position
    Front Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1997-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1997-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26055049 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26055049 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the front brake rotors for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Remove them while supporting the caliper with wire to avoid damaging the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    Where should safety stands be positioned for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Position a safety stand under the lower control arm and support the steering knuckle assembly and lower control arm with another safety stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you disconnect the left and right side wheel drive shafts from the differential carrier for the 2002 Chevrolet S10? Posted by Customer
    A:
    Strike a block of wood or brass drift against the tripot housing to overcome the snap ring pressure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after placing the C-lock for the 2002 Chevrolet S10? Posted by Customer
    A:
    Pull the shaft flange outward to seat the lock in the differential gear and align the hole in the pinion shaft with the bolt hole in the differential case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the torque specification for the new pinion shaft lock bolt for the 2003 Chevrolet S10? Posted by Customer
    A:
    Tighten it to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the inner axle shaft and housing assembly for the 2003 Chevrolet S10? Posted by Customer
    A:
    Carefully work the inner axle shaft and housing assembly out of the drive axle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft for the 2001 GMC Jimmy? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How is the clutch gear attached to the inner axle shaft for the 2001 GMC Jimmy? Posted by Customer
    A:
    Install the new retaining ring into the clutch gear and drive the clutch gear onto the inner axle shaft with a plastic hammer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be placed on the axle housing cover for the 2000 GMC Jimmy? Posted by Customer
    A:
    A new gasket and add axle lubricant to a level of 9.5 mm (3/8 inch) from the top of the fill plug hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What components need to be installed after the knuckle for the 2004 GMC Sonoma? Posted by Customer
    A:
    Install the lower ball joint, the lower part of the shock absorber, and the upper ball joint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Assembly, Front Passenger Side 26055049 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26055049 Axle Assembly, Front Passenger Side is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26055049 Axle Assembly, Front Passenger Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 26055049 maintains top performance when functioning as the Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle unit at its Front Passenger Side. The component 26055049 is constructed from durable material and its dimensions span 34.2 x 5.3 x 5.4 inches while weighing 16.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shaft Kit, Front Axle. The part 26055049 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.