Make sure this part fits

GM 93720063
Axle Assembly

1997-2005 GM

Customer Questions & Expert Answers (11)
GM 93720063 Axle Assembly
  • Part Description
    Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle
  • Position
    Front
  • Replaces
    26055048
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number93720063
    Part DescriptionShaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle
    Other NamesOutput Shaft; Shaft Kit, Front Axle
    Item Dimensions6.3 x 6.4 x 28.8 inches
    Item Weight16.50 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces26055048
    ManufacturerGeneral Motors
    SKU93720063
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1997-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1997-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Hey, is 93720063 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 93720063 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done when pulling the axle out from the differential carrier for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Support it to avoid tearing the boot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the wheel drive shaft for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Unlock the steering column to allow free movement of the steering linkage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step after completing the installation for the 2003 Chevrolet S10? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done for axles without a locking differential for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the pinion shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after removing the axle for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the front differential carrier shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after seating the axle shaft lock into the differential side gear for the 2003 Chevrolet S10? Posted by Customer
    A:
    Install the pinion shaft, aligning the hole in the pinion shaft with the bolt hole in the differential case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What tool is used to install the new clutch fork seal for the 2001 GMC Jimmy? Posted by Customer
    A:
    Use the Clutch Fork Housing Seal Installer (J33799) to install the new clutch fork seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after removing the brake components for the 2001 GMC Jimmy? Posted by Customer
    A:
    Take off the rear cover and gasket, then remove the pinion shaft locking bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be placed on the axle housing cover for the 2000 GMC Jimmy? Posted by Customer
    A:
    A new gasket and add axle lubricant to a level of 9.5 mm (3/8 inch) from the top of the fill plug hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step in the installation process for the 2004 GMC Sonoma? Posted by Customer
    A:
    Install the front brake rotors and the front differential carrier shield, then remove the strap from the frame, install the two front tire and wheel assemblies, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 93720063, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 93720063 Axle Assembly. It is sometimes referred to as GM Axle Shaft. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 93720063 Axle Assembly. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery