Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 17202005
Throttle Body

2002-2005 GM

Customer Questions & Expert Answers (6)
GM 17202005 Throttle Body
  • Part Description
    Body, Fuel Injection Air Meter
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2004 Saturn Ion Throttle Body Diagram for 17202005
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 17202005

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Chevrolet CavalierBase, LS, LS Sport4 Cyl 2.2 L GAS
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    2002-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS
    2002-2005 Pontiac Grand AmSE, SE14 Cyl 2.2 L GAS
    2002-2005 Pontiac SunfireBase, GT, SE4 Cyl 2.2 L GAS
    2003-2004 Saturn Ion1, 2, 34 Cyl 2.2 L GAS
    2004 Saturn L30014 Cyl 2.2 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 17202005 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 17202005 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the throttle body assembly on Chevrolet Classic? Posted by Customer
    A:
    First, to remove the Throttle Body assembly, remove the air cleaner resonator and disconnect the idle air control (IAC) valve harness connector, the throttle position (TP) sensor harness connector, and the vacuum hoses at the Throttle Body. Then you will remove the accelerator control bracket and cables from the Throttle Body, followed by the Throttle Body attaching bolts and studs and finally take out the Throttle Body from the Intake Manifold. Ensure that you inspect the Throttle Body Gasket first and replace it, if needed, before installation. Attach the Throttle Body to the Intake Manifold, ensuring to adhere to the fastener notice in the service precautions , then secure them using the Throttle Body attaching bolts and studs while tightening them to a torque of 10 n.m (89 lb in). Refit the accelerator cable bracket and cables, connect the vacuum hoses to the Throttle Body and then reconnect the tp sensor and iac valve harness connectors. Lastly, reinstall the air cleaner resonator and check the accelerator movement by depressing and releasing the pedal fully.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to properly service and repair the Throttle Body on Chevrolet Classic? Posted by Customer
    A:
    To replace the Throttle Body assembly, one wants to disconnect the air cleaner resonator, then disconnect the idle air control (IAC) valve harness connector, and the throttle position (TP) harness connector, then disconnect the vacuum hoses at the Throttle Body. Then strip off the accelerator control bracket and cables from the Throttle Body, then Throttle Body attaching bolts and studs , and then eject the Throttle Body from the Intake Manifold. For installation, check the Throttle Body Gasket and if required, change it after which you will install Throttle Body onto the Intake Manifold tightening it with Throttle Body attaching bolts and studs then tighten it to 10 n.m (89 lb in). Reuse the accelerator cable bracket and cables and the vacuum hoses to the Throttle Body, as well as connect up the tp sensor and iac valve harness connectors. Lastly, adjust the accelerator movement again by depressing and releasing the pedal completely.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be disconnected after removing the air cleaner resonator for the 2004 Chevrolet Cavalier? Posted by Customer
    A:
    Disconnect the idle air control (IAC) valve harness connector, the throttle position (TP) sensor harness connector, and the vacuum hoses at the throttle body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should be connected after reattaching the hoses for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Connect the electrical connectors to the TP sensor and IAC valve.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should be reattached after securing the throttle body for the 2005 Chevrolet Cavalier? Posted by Customer
    A:
    Reattach the accelerator cable bracket and cables.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Throttle Body
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Throttle Body 17202005 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 17202005 Throttle Body is available in the market under the name GM Throttle Body. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 17202005 Throttle Body fits certain Chevrolet Classic, Cavalier models, as well as Pontiac Grand Am, Sunfire. Additionally, it is compatible with Oldsmobile Alero and Saturn Ion, L300 models.
The original GM component designated by manufacturer part number 17202005 maintains top performance when functioning as the Body, Fuel Injection Air Meter unit. The component 17202005 is constructed from durable material and its dimensions span 7.1 x 13.3 x 12.2 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 17202005 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.