Make sure this part fits

GM 19418810
M.A.P. Sensor

2004-2009 GM

Customer Questions & Expert Answers (13)
GM 19418810 M.A.P. Sensor
  • Part Description
    Sensor, Computer Control Sensors; MAP Sensor
  • Replaces
    09350899, 12580698, 12615136, 9350899
  • Manufacturer
    General Motors
Make sure this part fits
$70.30 MSRP: $142.80
You Save: $72.50 (51%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    2004 Buick RegalGS, LS6 Cyl 3.8 L GAS
    2006-2009 Cadillac STSV8 Cyl 4.4 L GAS
    2006-2009 Cadillac XLRV8 Cyl 4.4 L GAS
    2005-2007 Chevrolet CobaltSS4 Cyl 2.0 L GAS
    2005 Chevrolet ImpalaBase, LS, SS6 Cyl 3.8 L GAS
    2004-2005 Chevrolet Monte CarloLT, SS6 Cyl 3.8 L GAS
    2004-2007 Pontiac Grand PrixGT, GTP6 Cyl 3.8 L GAS
    2004-2007 Saturn IonRed Line4 Cyl 2.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19418810 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19418810 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be checked before installing the MAP sensor for the 2004 Buick Regal? Posted by Customer
    A:
    Ensure that the seal is properly installed on the MAP sensor and is not damaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What is the torque specification for tightening the MAP sensor screws for the 2004 Buick Regal? Posted by Customer
    A:
    Tighten them to 5 N.m (44 lb in) as per the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    How should the MAP sensor be installed for the 2008 Cadillac XLR? Posted by Customer
    A:
    Ensure it is properly seated in the intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What is the first step to replace the Manifold Absolute Pressure Sensor for the 2008 Cadillac XLR? Posted by Customer
    A:
    Turn the ignition OFF and remove the engine sight shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What is the first step to replace the Manifold Absolute Pressure Sensor for the 2009 Cadillac XLR? Posted by Customer
    A:
    Turn the ignition OFF and remove the engine sight shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What is the final step after installing the BARO sensor for the 2007 Cadillac XLR? Posted by Customer
    A:
    Reinstall the engine sight shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What is the first step to replace the Manifold Absolute Pressure Sensor for the 2006 Cadillac STS? Posted by Customer
    A:
    Turn the ignition OFF and remove the engine sight shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What should be done after installing the MAP sensor for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Connect the engine harness electrical connector to the MAP sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What should be done after removing the throttle body for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    Disconnect the manifold absolute pressure (MAP) sensor harness connector and remove the MAP sensor from the intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    How should the new MAP sensor seal be prepared before installation for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Lubricate the new MAP sensor seal with clean engine oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What is the first step to replace the MAP sensor on the L36 for the 2005 Chevrolet Impala? Posted by Customer
    A:
    First, remove the fuel injector sight shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What is the next step after positioning the MAP sensor for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the inlet vacuum hose to the MAP sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar MAP Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM M.A.P. Sensor 19418810 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19418810 M.A.P. Sensor is available in the market under the name GM MAP Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19418810 M.A.P. Sensor fits certain Chevrolet Impala, Cobalt, Monte Carlo models, as well as Cadillac XLR, STS. Additionally, it is compatible with Buick Regal, Park Avenue and Pontiac Grand Prix models.
The original GM component designated by manufacturer part number 19418810 maintains top performance when functioning as the Sensor, Computer Control Sensors; MAP Sensor unit. The component 19418810 is constructed from durable material. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pressure Sensor; Boost Solenoid; Barometric Sensor; Sensor, Turbocharger/Supercharger. The part 19418810 has available replacement options 09350899, 12580698, 12615136, 9350899. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.