Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19121308
Fuel Gauge Sending Unit

1998-2002 GM

Customer Questions & Expert Answers (9)
GM 19121308 Fuel Gauge Sending Unit
  • Part Description
    Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit
  • Replaces
    25314262
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 19121308 Fuel Gauge Sending Unit is Ref No. 9 in the diagram below

    2002 GMC Savana 2500 Fuel Gauge Sending Unit Diagram for 19121308
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19121308

  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2002 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1998-2002 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
    1998-2002 Chevrolet Express 3500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
    1998-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
    1998-2002 GMC Savana 1500Base, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1998-2002 GMC Savana 2500Base, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS
    1998-2002 GMC Savana 3500Base, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19121308 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19121308 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fuel level sensor on Chevrolet Express 3500? Posted by Customer
    A:
    The process begins with Battery Cable de-powering and evacuating fuel system pressure before replacement of the sensor. Start by draining the Fuel Tank and then proceeding to eliminate the tank before removing the fuel sender assembly. The first step is to disconnect the fuel pump electrical connector then remove the retaining clip of the Fuel Level Sensor electrical connector which sits underneath the fuel sender cover. After removing the retaining clip you need to squeeze the locking tangs of the Fuel Level Sensor to extract it from position. Install the new Fuel Level Sensor by placing it into position before anchoring it with retaining clip. Connect the electrical connector to the Fuel Level Sensor before arranging the retaining clip. The next operation includes reinstalling the fuel sender assembly after reconnecting the fuel pump electrical connector. Then reinstalling the Fuel Tank follows suit. Place fuel inside the tank before putting on the fuel cap and reconnecting the negative battery lead. End this tall order by performing a fuel leak inspection by waiting 2 seconds with ignition on followed by 10 seconds with ignition off and another 2 seconds with ignition on.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fuel level sensor on GMC Savana 1500? Posted by Customer
    A:
    You must disconnect the negative Battery Cable and release fuel system pressure for replacing the Fuel Level Sensor. Start by draining the Fuel Tank before taking out the Fuel Tank along with the fuel sender assembly. The technician should first disconnect the fuel pump electrical connector and remove the electrical connector retaining clip which secures the Fuel Level Sensor. First disconnect the Fuel Level Sensor electrical connector which is beneath the fuel sender cover then extract the retaining clip from the sensor. Pressing the locking tangs makes it possible to remove the Fuel Level Sensor. To install the new Fuel Level Sensor you should first secure it with the retaining clip then proceed to attach the electrical connector and electrical connector retaining clip to their respective locations. Connect the electrical connector to the Fuel Level Sensor followed by installation of the electrical connector retaining clip. The fuel sender assembly goes back in followed by the Fuel Tank once you complete the fuel pump electrical connector reconnection process. Reforecast the fuel cell then install its filler opening before you reconnect vehicle electricity supply. Job completion requires starting the ignition for 2 seconds followed by switching it off for 10 seconds then restarting it to look for fuel leaks.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you drain the fuel tank for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Use the Fuel Tank Draining Procedure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the first step in the installation process for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Install the fuel level sensor and secure it with the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What should you avoid when installing the sending unit for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Avoid folding or twisting the strainer to prevent fuel flow restriction.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the first step for installation for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Position the fuel sender buffer module back into the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What is the first step to replace the fuel sender buffer module for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Remove the instrument panel passenger knee bolster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    Q:
    What should you do after installing the fuel tank for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Add the fuel removed from it, reconnect the negative battery cable, and inspect for fuel leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Level Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Fuel Gauge Sending Unit 19121308 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19121308 Fuel Gauge Sending Unit is available in the market under the name GM Fuel Tank Sending Unit, Fuel Level Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19121308 Fuel Gauge Sending Unit fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 19121308 maintains top performance when functioning as the Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit unit. The component 19121308 is constructed from durable material and its dimensions span 7.8 x 5.8 x 5.8 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Level Sensor. The part 19121308 has available replacement options 25314262. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.