Make sure this part fits

GM 15202911
Handle, Outside, Black Grained, Driver Side

1994-2005 GM

Customer Questions & Expert Answers (15)
GM 15202911 Handle, Outside, Black Grained, Driver Side
  • Part Description
    Handle, Door Outside Handle; Exterior Door Handle
  • Position
    Driver Side
  • Replaces
    15007213, 15647661, 15757214, 15058575
  • Manufacturer
    General Motors
Make sure this part fits
$58.99 MSRP: $87.80
You Save: $28.81 (33%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1994-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1994-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15202911 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15202911 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after closing the window for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the front inside door handle bezel screw for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the screw that retains the rear inside door handle bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What tool is used to drill out the rivets for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    The Rivet Gun (J 34940) is used to drill out the rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new endgate handle assembly for the 2002 Chevrolet S10? Posted by Customer
    A:
    Position the endgate handle assembly on the endgate and secure it using two rivets with the Rivet Gun (J 34940).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the screws for the 2003 Chevrolet S10? Posted by Customer
    A:
    Drill out the rivets that hold the endgate handle assembly to the endgate and remove the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you secure the new inside door handle for the 2003 Chevrolet S10? Posted by Customer
    A:
    Secure it with the retaining rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the process for the 2002 Chevrolet S10? Posted by Customer
    A:
    Put the door trim panel back in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you detach the inside door handle from the door for the 2002 Chevrolet S10? Posted by Customer
    A:
    Slide the inside door handle rearward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should the upper lock rod be positioned during installation for the 2003 GMC Sonoma? Posted by Customer
    A:
    The upper lock rod should be positioned in the retainer with approximately 10 1-2 mm (0.39-0.47 in) showing, which is about 11-12 threads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door interior handle for the 2000 GMC Jimmy? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be replaced after reconnecting the rods for the 2000 GMC Jimmy? Posted by Customer
    A:
    Replace the outside door handle screw access hole plug, followed by the water deflector and finally the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be removed after accessing the screw access hole for the 2001 GMC Jimmy? Posted by Customer
    A:
    Remove the outside door handle screw access hole plug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door interior handle for the 2003 GMC Sonoma? Posted by Customer
    A:
    Remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done to remove the outside door handle for the 2003 GMC Sonoma? Posted by Customer
    A:
    Remove the screws that secure the outside door handle to the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Black Grained, Driver Side 15202911 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15202911 Handle, Outside, Black Grained, Driver Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15202911 Handle, Outside, Black Grained, Driver Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15202911 maintains top performance when functioning as the Handle, Door Outside Handle; Exterior Door Handle unit at its Driver Side. The component 15202911 is constructed from durable material and its dimensions span 9.1 x 4.8 x 2.8 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15202911 has available replacement options 15007213, 15647661, 15757214, 15058575. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.