Make sure this part fits

GM 88943623
Handle

2002-2009 GM

Customer Questions & Expert Answers (17)
GM 88943623 Handle
  • Part Description
    Handle, End Gate Lock
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88943623 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88943623 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done if the lock cylinder is equipped during installation for the 2007 Buick Rainier? Posted by Customer
    A:
    Install the lock cylinder to the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after installing the rods for the 2006 Buick Rainier? Posted by Customer
    A:
    Install the rod retainer locks and insert the handle locator tab into the locator cutout, moving the handle rearward to index the fastener hole to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the door trim panel and water deflector for the 2006 Buick Rainier? Posted by Customer
    A:
    Release the clip that retains the lock rod to the outside door handle and remove the lock rod from the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should you do after removing the handle from the door for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    For installation, position the handle to the door and install the rods, followed by the rod retainer locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new handle for the 2004 GMC Envoy? Posted by Customer
    A:
    Install the handle onto the rear side access door control assembly and press it in until the spring clip retaining the handle is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the lock rod for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the 2 door handle retaining nuts and take the handle assembly out of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    First install the bezel to the door, ensuring that all 4 retaining tabs are fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after releasing the handle locator tab for the 2007 GMC Envoy? Posted by Customer
    A:
    Release the rod retainer locks and remove the rods from the handle before taking the handle out of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the door trim panel for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Take out the handle retaining bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done if the lock cylinder is equipped for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Release the lock cylinder rod retainer from the lock rod and remove the lock cylinder rod from the handle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for installing the nut (Nut 115) for the 2008 GMC Envoy? Posted by Customer
    A:
    Tighten it to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you start the installation process for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Attach the lock cylinder to the handle, then install the handle assembly back onto the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be removed after closing the window for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the door trim panel and the rear half of the water deflector from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front outside door handle for the 2003 GMC Envoy? Posted by Customer
    A:
    Close the window completely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be unscrewed to remove the handle for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Unscrew the nut that holds the handle and bracket to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after releasing the handle locator tab for the 2009 GMC Envoy? Posted by Customer
    A:
    Release the rod retainer locks and remove the rods from the handle before taking the handle out of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle 88943623 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88943623 Handle is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88943623 Handle fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 88943623 maintains top performance when functioning as the Handle, End Gate Lock unit. The component 88943623 is constructed from durable material and its dimensions span 10.1 x 4.4 x 4.4 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 88943623 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.