Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15994451
Upper Hinge, Driver Side

1996-2024 GM

Customer Questions & Expert Answers (31)
GM 15994451 Upper Hinge, Driver Side
  • Part Description
    Hinge Kit, Door Hinge
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$217.15 MSRP: $324.65
You Save: $107.50 (34%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 15994451 Upper Hinge, Driver Side is Ref No. 13 in the diagram below

    1999 Chevy Express 1500 Upper Hinge, Driver Side Diagram for 15994451
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15994451

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15994451
    Part DescriptionHinge Kit, Door Hinge
    Other NamesDoor Hinge
    Item Dimensions10.1 x 5.6 x 5.6 inches
    Item Weight4.20 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15994451
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2014 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 GMC Savana 2500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 GMC Savana 3500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS

  • Customer Questions & Expert Answers

    Q:
    Is this 15994451 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15994451 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done during the installation of the hinge for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Have an assistant help you attach the hinge to the body and the door, installing the screws loosely at first.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done if any weld remains for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Use a chisel to separate the hinge from the body pillar or door, then remove the hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge on the cargo door for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Ensure that both hinges are replaced one at a time.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the replacement hinges be positioned for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Position the bolt-on service replacement hinges within the scribe marks made during removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the welds for the 2011 Chevrolet Express 1500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after the door is installed for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Apply sealer around the hinges and paint the hinge assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after applying the sealant for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Install the door and adjust the adjacent front side door striker as necessary for flushness between the two doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after removing the lower hinge pin for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Grasp the upper hinge pin with locking pliers and drive it out using a soft-faced hammer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the process for drilling the hinge for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark, then drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done if any weld remains for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Use a chisel to separate the hinge from the body pillar or door, then remove the hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step in the installation process for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    With an assistant, install the hinge to the body and the door, ensuring to install the screws loosely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the welds for the 2011 Chevrolet Express 2500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the 3-hole pattern for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Place the service backing plate on the production hinge surface, mark the 3-hole pattern, then center punch and drill pilot holes with a 3 mm (1/8 in) drill bit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be checked after installing the door for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Align the door as required and do not close it completely until visually checking that the lock will correctly engage the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What preparation is needed for installation for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Deburr the holes on the inside of the hinge pillar or door and inspect the hinge seating zone for flatness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after drilling the hinge for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Cut the hinge weld nuggets off and grind the pillar hinge mating surface flush.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the new hinges be positioned for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Position the bolt-on service replacement hinges within the scribe marks made during removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the welds for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you reinstall the door for the 2009 GMC Savana 1500? Posted by Customer
    A:
    With assistance, reinstall the door to the vehicle and temporarily hold it in place with a bolt through the lower hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done during the installation of the hinge for the 2002 GMC Savana 3500? Posted by Customer
    A:
    With an assistant, position the hinge back onto the body and door, ensuring to follow the Fastener Notice in Cautions and Notices.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What preparation is needed before installing the new hinges for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone, then coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the intermediate side door hinge for the 2010 GMC Savana 3500? Posted by Customer
    A:
    First, paint the service hinges body color.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is important to do before tightening the screws for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Align the door properly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you gain access for drilling the production body side door hinge for the 2011 GMC Savana 1500? Posted by Customer
    A:
    Cut the production body side door hinge using a reciprocating saw.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge for the 2006 GMC Savana 3500? Posted by Customer
    A:
    First, remove the door from the vehicle by following the appropriate door replacement procedure for either the left or right rear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the replacement hinges be positioned for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Position the bolt-on service replacement hinges within the scribe marks made during removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front side door upper and lower hinges for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Remove the sealer surrounding the hinge and scribe the location of the existing hinges on the body pillar or door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you check before closing the door completely for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Visually check that the lock will correctly engage the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the door for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Next, detach the hinges from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final torque specification for the bolts for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Tighten the bolts to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15994451, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15994451 Upper Hinge, Driver Side. It is sometimes referred to as GM Door Hinge. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15994451 Upper Hinge, Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery