Make sure this part fits

GM 15993424
Hinge

1996-2007 GM

Customer Questions & Expert Answers (19)
GM 15993424 Hinge
  • Part Description
    Hinge Kit, Door Hinge
  • Position
    Rear Lower
  • Replaced By
    19168524
  • Manufacturer
    General Motors
Make sure this part fits
$82.44 MSRP: $159.91
You Save: $77.47 (49%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2007 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2007 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
    1996-2007 Chevrolet Express 3500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2007 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2007 GMC Savana 2500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
    1996-2007 GMC Savana 3500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15993424 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15993424 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done before installing the new hinges for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone, then coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the torque specification for tightening the screws for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    The screws should be tightened to a torque of 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you remove the hinge for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    With an assistant, remove the screws and then take out the hinge from the body and the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the screws for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Take off the hinge from both the body and the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you drill holes through the pillar for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Drill 13 mm (33/64 in) holes through the pillar using the pilot holes as a guide.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you mark the hinge base for drilling for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Mark the approximate centers of the mig welds on the hinge base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you reinstall the door for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    With assistance, reinstall the door and secure it temporarily with a bolt through the lower hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the new hinges be positioned for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Position the bolt-on service replacement hinges within the scribe marks made during removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the preliminary torque for tightening the bolts for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Tighten the bolts to a preliminary torque of 5 N.m (44 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done if any weld remains for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Use a chisel to separate the hinge from the body pillar or door, then remove the hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What if any weld remains after drilling for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Use a chisel to separate the hinge from the body pillar or door, and then remove the hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done with the screws during installation for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Install the screws loosely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the hinges for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the door, aligning it as necessary, and do not close it completely until visually checking that the lock will engage the striker correctly, then tighten the bolts to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after drilling the pilot hole for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after marking the weld centers for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge (RPO PRP) for the 2002 GMC Savana 3500? Posted by Customer
    A:
    First, with an assistant, remove screws and then take out the hinge from both the body and the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you mark the hinge for removal for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Mark the approximate centers of the mig welds on the hinge base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the door for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Next, detach the hinges from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Hinge 15993424 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15993424 Hinge is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15993424 Hinge fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 15993424 maintains top performance when functioning as the Hinge Kit, Door Hinge unit at its Rear Lower. The component 15993424 is constructed from durable material and its dimensions span 3.2 x 3.1 x 3.1 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Door Hinge. The part 15993424 has available replacement options listed under 19168524. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.