Make sure this part fits

GM 19257341
Hinge, Rear Upper

1996-2024 GM

Customer Questions & Expert Answers (31)
GM 19257341 Hinge, Rear Upper
GM 19257341 Hinge, Rear Upper
  • Part Description
    Hinge Kit, Rear Side Door Upper (Door & Body Side); Door Hinge
  • Position
    Rear Upper
  • Replaced By
    19540839
  • Replaces
    19120832, 19210563, 15993415
  • Manufacturer
    General Motors
Make sure this part fits
$164.07 MSRP: $245.30
You Save: $81.23 (34%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2014 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 GMC Savana 2500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 GMC Savana 3500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19257341 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19257341 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for tightening the screws for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    The screws should be tightened to a torque of 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final torque specification for the door for the 2011 Chevrolet Express 1500? Posted by Customer
    A:
    Tighten to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you remove the hinge for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    With an assistant, remove the screws and then take out the hinge from the body and the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to mark the hinge location for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Tape around the periphery of the body side hinge and move the backing plate rearward 4 mm (0.16 in) before marking the 3-hole pattern.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    Who should assist in removing the screws and hinge for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    An assistant should help with the removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to prepare for installation for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Deburr the holes on the inside of the hinge pillar or door and inspect the hinge seating zone for flatness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the welds for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear side door hinge for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    First, remove the door from the vehicle and the sealer surrounding the hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the door for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Align the door as necessary and do not close it completely until visually checking that the lock will correctly engage the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the door for the 2011 Chevrolet Express 2500? Posted by Customer
    A:
    Eliminate the sealer surrounding the hinge and scribe the location of the existing hinges on the body pillar or door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after removing the bolt from the lower hinge pin hole for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Have an assistant help you take the door off the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you protect the interior during drilling for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Protect the vehicle's interior from metal grindings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step after ensuring proper alignment for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Tighten the bolts to 25 N.m (18 lb ft), then apply sealer around the hinges, paint the hinge assembly, and reinstall the door to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to prepare for installation for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Deburr the holes on the inside of the hinge pillar or door and inspect the hinge seating zone for flatness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How can you prevent water leaks after installation for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Apply clear silicone sealant around the entire edge of the service hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front side door hinge for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Remove the sealer surrounding the hinge and scribe the location of the existing hinges on the body pillar or door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the installation process for the bushings for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Use a suitable tool to install the lower hinge pin bushings to the body and the upper hinge pin bushings to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the hinge mounting zone before installation for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone, then coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you install the service hinge for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Install the service hinge and backing plate, tightening to 23 Nm (17 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge (RPO PRP) for the 2002 GMC Savana 3500? Posted by Customer
    A:
    First, with an assistant, remove screws and then take out the hinge from both the body and the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the intermediate side door hinge on the body side for the 2011 GMC Savana 1500? Posted by Customer
    A:
    First, paint the service hinges body color.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be applied to the hinge mounting zone for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone and coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the door for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Eliminate the sealer surrounding the hinge and scribe the location of the existing hinges on the body pillar or door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge for the 2001 GMC Savana 3500? Posted by Customer
    A:
    First, remove the door from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Ensure that both hinges on the same panel are replaced one at a time.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the new hinges be positioned and installed for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Position the bolt-on service replacement hinges within the scribe marks made during removal and install the hinge to the body pillar or door using the bolts and tapping plate supplied with the service replacement kit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How are the new hinges installed for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Install the hinge to the body pillar or door using the bolts and tapping plate supplied with the service replacement kit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step after checking the door alignment for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Tighten the bolts to 25 N.m (18 lb ft), apply sealer around the hinges, and paint the hinge assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear side door hinge for the 2000 GMC Savana 3500? Posted by Customer
    A:
    First, remove the door from the vehicle by following the procedures for Rear Door Replacement - Left Side or Rear Door Replacement - Right Side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you prepare to remove the hinges for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark, then drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Hinge, Rear Upper 19257341 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19257341 Hinge, Rear Upper is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19257341 Hinge, Rear Upper fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 19257341 maintains top performance when functioning as the Hinge Kit, Rear Side Door Upper (Door & Body Side); Door Hinge unit at its Rear Upper. The component 19257341 is constructed from durable material and its dimensions span 6.9 x 4.3 x 4.5 inches while weighing 1.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hinge Kit, Door Hinge. The part 19257341 has available replacement options listed under 19540839 or 19120832, 19210563, 15993415. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.