Make sure this part fits

GM 25996982
Lower Hinge, Rear Driver Side

2004-2012 GM

Customer Questions & Expert Answers (11)
GM 25996982 Lower Hinge, Rear Driver Side
  • Part Description
    Hinge, Rear Side Door Lower; Door Hinge
  • Position
    Rear Lower Driver Side
  • Replaces
    25883758, 15810211, 97325855
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2006-2010 Hummer H3Alpha, Base, Championship Series, X5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2009-2010 Hummer H3TAlpha, Base5 Cyl 3.7 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25996982 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25996982 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the rear side door hinge for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Open the door and remove the bolt retaining the rear door check link to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step in the process for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Install the bolt retaining the front door check link to the body and tighten it to 25 Nm (18.4 lb ft), then inspect the door for proper operation and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front door hinge for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Begin by opening the front door and removing the bolt that retains the front door check link to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the procedure for removing the body side hinges for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Remove the bolts retaining the body side hinges to the body and take the hinges off.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the bolt for the check link for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Take out the front door wiring harness grommet from the body and disconnect the door wiring harness connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the mounting surfaces of the body side hinges for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Clean the mounting surfaces with a clean rag and mark the rear door hinge locations with a grease pencil or suitable marker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step in the process for the 2009 GMC Canyon? Posted by Customer
    A:
    Install the bolt retaining the front door check link to the body and tighten it to 25 Nm (18 lb ft), then inspect the door for proper operation and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after installing the body side front door hinge for the 2007 GMC Canyon? Posted by Customer
    A:
    With assistance, lower the front door onto the body side hinge straps and install the bolts retaining the front door hinge keeper straps, tightening these bolts to 25 N.m (18.4 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step in the process for the 2010 GMC Canyon? Posted by Customer
    A:
    Install the bolt retaining the front door check link to the body and tighten it to 25 Nm (18.4 lb ft), then inspect the door for proper operation and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the hinge locations for the 2004 GMC Canyon? Posted by Customer
    A:
    Remove the bolts retaining the body side hinges to the body and take the hinges off.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Hinge, Rear Driver Side 25996982 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25996982 Lower Hinge, Rear Driver Side is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25996982 Lower Hinge, Rear Driver Side fits certain Chevrolet Colorado models, as well as GMC Canyon. Additionally, it is compatible with Hummer H3, H3T models.
The original GM component designated by manufacturer part number 25996982 maintains top performance when functioning as the Hinge, Rear Side Door Lower; Door Hinge unit at its Rear Lower Driver Side. The component 25996982 is constructed from durable material and its dimensions span 4.4 x 3.5 x 3.1 inches while weighing 2.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hinge, Door Hinge. The part 25996982 has available replacement options 25883758, 15810211, 97325855. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.