Make sure this part fits

GM 15158650
Flex Hose, Passenger Side

2000-2005 GM

Customer Questions & Expert Answers (8)
GM 15158650 Flex Hose, Passenger Side
  • Part Description
    Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15158650
    Part DescriptionHose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
    Item Dimensions25.4 x 2.5 x 2.5 inches
    Item Weight0.80 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15158650
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    2000-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2000-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    2000-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2001-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15158650 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15158650 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake line on a dual piston caliper on GMC Jimmy? Posted by Customer
    A:
    To replace front brake hose in the vehicle with a dual piston, first, lift and support the vehicle properly. Unmount the front tire and wheel assembly, then hose fitting on both ends and cleanse, rid the hose fitting of dirt grease and foreign material. Put a container under the hose to collect any dripping brake fluid, replace brake pipe fitting, and remove the brake pipe retainer. Next, remove the front flex hose support bracket nut and bolt, and also the abs sensor wire bracket bolt from the upper Control Arm. Next, take off the front brake hose bolt and gasket from the caliper, and then remove the front brake hose. For installation, make sure that the front flex hose is not twisted and does not touch other components. Replace the brass gasket with a new one, connect the front brake hose to the brake caliper, and fasten the front brake hose bolt up to 54 nm (40 ft. Lbs.). Put the abs sensor wire bracket bolt and lock it into place with 17 nm (13 ft. Lbs.), put the front brake hose support bracket bolt and nut tighten its nut into place with 22nm 16ft. Lbs. Mount the retainer of the front brake pipe, connect the brake pipe fitting to the brake hose and tighten to 17 nm (13 ft. Lbs.). Bleed the brake system, unload the front tires and its attachment, and lastly, take the safety stands away and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool is used to disconnect the brake hose from the brake pipe fitting for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    A backup wrench.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the final steps after installing the brake hose for the 2002 Chevrolet S10? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the tire and wheel assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be ensured regarding the metal gaskets for the 2003 Chevrolet S10? Posted by Customer
    A:
    Ensure to remove any stuck metal gaskets from the brake hose bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the brass gaskets during installation for the 2001 GMC Jimmy? Posted by Customer
    A:
    Replace them with new ones.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after raising for the 2000 GMC Jimmy? Posted by Customer
    A:
    Remove the front tires and wheels assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the new brake pipe be prepared for installation for the 2004 GMC Sonoma? Posted by Customer
    A:
    Bend the new brake pipe for a proper fit and install it, ensuring a clearance of 19 mm (3/4 lbs.) from all moving or vibrating components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15158650, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15158650 Flex Hose, Passenger Side. It is sometimes referred to as GM Brake Line, GM Hydraulic Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15158650 Flex Hose, Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery