Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 84856648
Hub & Bearing

1999-2007 GM

Customer Questions & Expert Answers (3)
GM 84856648 Hub & Bearing
  • Part Description
    Hub Assembly-Front Wheel (W/ Bearing & Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub
  • Position
    Front
  • Replaces
    15037207, 15863440, 84356637, 10393162, 15102293, 15233111, 15112380
  • Manufacturer
    General Motors
Make sure this part fits
$153.68 MSRP: $300.88
You Save: $147.20 (49%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 84856648 Hub & Bearing is Ref No. 1 in the diagram below

    2000 Chevy Silverado 1500 Hub & Bearing Diagram for 84856648
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 84856648

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2000-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    1999-2007 GMC Sierra 1500Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
    2007 GMC Sierra 1500 ClassicDenali, Hybrid, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 GMC Sierra 1500 HDSLE, SLT8 Cyl 6.0 L GAS
    2007 GMC Sierra 1500 HD ClassicSLE, SLT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 84856648 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 84856648 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear axle wheel hub, wheel bearing, and wheel seal on Chevrolet Avalanche 1500? Posted by Customer
    A:
    To replace rear axle hub, bearing, cup, or seal, start by lifting the vehicle and removing the tire and wheel assembly after the brake caliper and Axle Shaft. Then remove the axle nut retaining ring and the key, then tie the adjusting nut with the help of the wheel bearing nut wrench (J2222-C) before reviving the adjusting nut. Remove the hub from the axle housing and, if needed, discard the rotor. By using an appropriate seal extraction tool, remove the oil seal from the wheel hub, which will remove the inner hub and the inner hub bearing cup. Do this by gently striking them using brass drift and hammer. First, take off the retaining ring from the wheel hub, after that remove the outer hub bearing and bearing cup using the wheel bearing race installer - outer (J24426) and universal driver handle (J8092). For installation make good the outer and inner wheel bearings together with their corresponding cups and the axle housing with a light coating of ep bearing lubricant of high melting point. Mount the outer bearing and cup into the wheel hub, using the hub outer bearing race installer (J44419) and universal driver handle (J8092) to drive in the bearing cup. Make sure that the retaining ring is fully seated to its groove then install the inner bearing cup using the wheel bearing race installer - inner (J24427) and the universal driver handle (J8092), drive it in. Mount the inner bearing and a new oil seal with the use of differential bearing and hub seal installer (J44420) and universal driver handle (J8092). If required, reassemble the rotor, apply a lubricant to the axle housing spindle, and then fast the wheel hub to the axle housing. With the use of the wheel bearing nut wrench (J2222-C), install the adjusting nut, adjust the wheel bearings and reinstall the Axle Shaft, brake caliper and tire and wheel assembly. Lastly, check and pour axle lubricant to the axle housing if required and then let the vehicle down.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear axle wheel hub, wheel bearing, and wheel seal on Chevrolet Suburban 1500? Posted by Customer
    A:
    To replace rear axle hub, bearing, cup, or seal, start by lifting the vehicle and removing the tire and wheel assembly after the brake caliper and Axle Shaft. Then remove the axle nut retaining ring and the key, then tie the adjusting nut with the help of the wheel bearing nut wrench (J2222-C) before reviving the adjusting nut. Remove the hub from the axle housing and, if needed, discard the rotor. By using an appropriate seal extraction tool, remove the oil seal from the wheel hub, which will remove the inner hub and the inner hub bearing cup. Do this by gently striking them using brass drift and hammer. First, take off the retaining ring from the wheel hub, after that remove the outer hub bearing and bearing cup using the wheel bearing race installer - outer (J24426) and universal driver handle (J8092). For installation make good the outer and inner wheel bearings together with their corresponding cups and the axle housing with a light coating of ep bearing lubricant of high melting point. Mount the outer bearing and cup into the wheel hub, using the hub outer bearing race installer (J44419) and universal driver handle (J8092) to drive in the bearing cup. Make sure that the retaining ring is fully seated to its groove then install the inner bearing cup using the wheel bearing race installer - inner (J24427) and the universal driver handle (J8092), drive it in. Mount the inner bearing and a new oil seal with the use of differential bearing and hub seal installer (J44420) and universal driver handle (J8092). If required, reassemble the rotor, apply a lubricant to the axle housing spindle, and then fast the wheel hub to the axle housing. With the use of the wheel bearing nut wrench (J2222-C), install the adjusting nut, adjust the wheel bearings and reinstall the Axle Shaft, brake caliper and tire and wheel assembly. Lastly, check and pour axle lubricant to the axle housing if required and then let the vehicle down.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Hub & Bearing 84856648 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 84856648 Hub & Bearing is available in the market under the name GM Wheel Hub. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 84856648 Hub & Bearing fits certain Chevrolet Silverado 1500, Suburban 1500, Avalanche 1500 models, as well as GMC Sierra 1500, Yukon XL 1500, Sierra 1500 Classic models.
The original GM component designated by manufacturer part number 84856648 maintains top performance when functioning as the Hub Assembly-Front Wheel (W/ Bearing & Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub unit at its Front. The component 84856648 is constructed from durable material. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hub, Front Wheel. The part 84856648 has available replacement options 15037207, 15863440, 84356637, 10393162, 15102293, 15233111, 15112380. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.