Make sure this part fits

GM 12592934
Oil Tube

2006-2011 GM

Customer Questions & Expert Answers (12)
GM 12592934 Oil Tube
  • Part Description
    Indicator Assembly-Oil Level; Oil Dipstick Tube
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2011 Buick LucerneCX, CXL, CXL Special Edition6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2007 Buick TerrazaCX, CXL6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2011 Chevrolet Impala50th Anniversary Edition, LS, LT, LTZ, Police6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2010 Chevrolet MalibuClassic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2006-2007 Chevrolet Monte CarloLS, LT, LTZ6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2006-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2010 Pontiac G6Base, GT, GTP6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2006 Pontiac MontanaSV66 Cyl 3.9 L GAS
    2007-2008 Saturn AuraXE6 Cyl 3.5 L GAS
    2006-2007 Saturn Relay1, 2, 36 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12592934 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12592934 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Dipstick Tube and oil level indicator on Buick Terraza? Posted by Customer
    A:
    Start by taking off the number 6 cylinder Spark Plug wire and follow it up by removing the oil level indicator along with its tube bracket bolt as preparation for removing the oil level indicator tube. A thorough check on the damage level of the o-ring seal on the oil level indicator tube must happen before implementing a new replacement. Clean engine oil must be used to lubricate the oil level indicator tube o-ring seal before putting the oil level indicator tube into the engine block according to the fastener notice. Proceed by installing the oil level indicator tube bracket bolt and torquing it to 25 n.m (18 lb ft) after which you should fit the oil level indicator and reconnect the Spark Plug wire to cylinder number 6.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Dipstick Tube and oil level indicator on Chevrolet Uplander? Posted by Customer
    A:
    The procedure begins by removing the Spark Plug wire from cylinder number 6 before taking out the oil level indicator and its bracket bolt to detach the oil level indicator tube. Check for damage on the oil level indicator tube o-ring seal and replace it when necessary. The installation process requires clean engine oil to lubricate the o-ring seal followed by inserting the oil level indicator tube into the engine block where attention should be given to the necessary fastener notice for safety purposes. Start by placing the oil level indicator tube bracket bolt and tightening it to 25 n.m (18 lb ft). After that replace the oil level indicator and return the Spark Plug wire back to the number 6 cylinder Spark Plug.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the oil level indicator tube for the 2010 Buick Lucerne? Posted by Customer
    A:
    First, remove the oil level indicator and the oil level indicator tube bracket bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What should be done after removing the spark plug wire for the 2006 Buick Terraza? Posted by Customer
    A:
    Take out the oil level indicator and the oil level indicator tube bracket bolt before removing the oil level indicator tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What should be done before installing the oil level indicator tube for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Lubricate the O-ring seal with clean engine oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    How should the oil level indicator tube be installed for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Install the oil level indicator tube into the engine block, ensuring to follow fastener caution guidelines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What is the next step after inspecting or replacing the O-ring seal for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Lubricate the O-ring seal with clean engine oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What should be done with the O-ring seals for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    If necessary, remove the O-ring seals from the tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What is the next step after unclipping the electrical wiring harness for the 2006 Chevrolet Malibu? Posted by Customer
    A:
    Remove the oil level indicator tube bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What should be done after tightening the tube bolt for the 2009 Chevrolet Malibu? Posted by Customer
    A:
    Reattach the engine harness clip to the tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    Q:
    What is the next step after lubricating the O-ring for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the O-ring onto the oil level indicator tube if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Dipstick Tube
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Oil Tube 12592934 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12592934 Oil Tube is available in the market under the name GM Dipstick Tube. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12592934 Oil Tube fits certain Chevrolet Malibu, Impala, Monte Carlo models, as well as Buick Lucerne, Terraza. Additionally, it is compatible with Pontiac G6, Montana and Saturn Vue, Aura, Relay models.
The original GM component designated by manufacturer part number 12592934 maintains top performance when functioning as the Indicator Assembly-Oil Level; Oil Dipstick Tube unit. The component 12592934 is constructed from durable material and its dimensions span 17.9 x 2.1 x 2.1 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Oil Tube O-Ring; Tube; Tube, Engine Oil Level. The part 12592934 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.