Make sure this part fits

GM 10284149
Stabilizer Bar Bushing, Green

1997-2016 GM

Customer Questions & Expert Answers (19)
GM 10284149 Stabilizer Bar Bushing, Green
GM 10284149 Stabilizer Bar Bushing, Green
  • Part Description
    Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.
  • Position
    Front
  • Replaces
    10289145, 25833525
  • Manufacturer
    General Motors
Make sure this part fits
$10.62 MSRP: $18.97
You Save: $8.35 (45%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    1997-2004 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2000-2013 Chevrolet Impala50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    2000-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    1998-2002 Oldsmobile IntrigueBase, GL, GLS, GX6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
    1997-2003 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10284149 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10284149 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the sway bar bushing on Buick LaCrosse? Posted by Customer
    A:
    The replacement of sway bar bushing insulators begins by safely lifting and supporting the motor vehicle. The procedure starts with unbolting the sway bar bushing insulator clamp bolts on both sides before continuing with the removal of its corresponding clamps. You must remove the left plus right sway bar bushing insulators which are attached to the sway bar. The installation process starts with positioning the left and right side sway bar bushing insulators on the sway bar followed by reattaching their corresponding clamps. Follow all instructions mentioned in the Fastener Notice of the Service Precautions during this operation. You should install the left and right side sway bar bushing insulator clamp bolts before tightening them to 38 Nm (28 ft. lbs.). Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the sway bar bushing on Buick Century? Posted by Customer
    A:
    The first step to service and repair the sway bar bushing starts with raising and supporting the vehicle. Before proceeding access the sway bar shaft insulator brackets by turning the tires and subsequently undo their left and right bolts which allows safe removal of the brackets. The next step is to extract both left and right side sway bar shaft insulators from sway bar positions. Installation requires first installing the sway bar shaft insulators to the shaft followed by securing the left and right side sway bar shaft insulator brackets. The procedure requires following the fastener notice in service precautions while installing left and right side sway bar shaft insulator bracket bolts with a torque of 48 Nm (35 inch lbs.). Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front sway bar bushing on Buick LaCrosse? Posted by Customer
    A:
    A support system should be implemented when raising the vehicle before starting sway bar bushing replacement. The removal process starts with bolting out the left and right sway bar bushing clamp followed by removing left and right side sway bar bushing clamps. Drive out the left and right side sway bar bushings from their position on the sway bar. Installing the left and right side sway bar bushings starts with putting them onto the sway bar before attaching the left and right side sway bar bushing clamps. The left and right side sway bar bushing clamp bolts need to be tightened to 42 Nm (31 ft. lbs.) while installing them. Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What comes after removing the bracket bolts for the 2003 Buick Century? Posted by Customer
    A:
    Remove the left and right side stabilizer shaft insulator brackets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the final step after tightening the bolts for the 2000 Buick Regal? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be done after placing the stabilizer shaft insulator bracket for the 2001 Buick Regal? Posted by Customer
    A:
    Install the stabilizer shaft bracket bolts, tightening the nuts to 48 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the specified torque for tightening the bracket bolts for the 2004 Buick Regal? Posted by Customer
    A:
    30 Nm (22 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the next step after removing the brackets for the 2005 Buick Century? Posted by Customer
    A:
    Take out the left and right side stabilizer shaft insulators from the stabilizer shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    How do you begin the installation process for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Place the left and right side stabilizer shaft insulators onto the stabilizer shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be done after placing the stabilizer shaft insulator for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Reinstall the stabilizer shaft insulator bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What bolts need to be removed to access the stabilizer shaft insulator brackets for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    The left and right side stabilizer shaft insulator bracket bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be removed after raising for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the bolt from the stabilizer shaft insulator bracket and take off the stabilizer shaft insulator bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be ensured during the installation process for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Follow the fastener notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be done after tightening the bolts for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the final step regarding the bolts for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Install the left and right side stabilizer shaft insulator bracket bolts, tightening them to 42 Nm (31 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What comes after removing the bolts for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the left and right side stabilizer shaft insulator brackets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What comes after removing the bolts for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Remove the left and right side stabilizer shaft insulator brackets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the torque specification for securing the bolts for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Tighten the left and right side stabilizer shaft insulator bracket bolts to 52 Nm (38 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Bar Bushing, Green 10284149 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10284149 Stabilizer Bar Bushing, Green is available in the market under the name GM Sway Bar Bushing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10284149 Stabilizer Bar Bushing, Green fits certain Chevrolet Impala, Monte Carlo, Impala Limited models, as well as Buick Regal, LaCrosse, Century. Additionally, it is compatible with Pontiac Grand Prix and Oldsmobile Intrigue models.
The original GM component designated by manufacturer part number 10284149 maintains top performance when functioning as the Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing. unit at its Front. The component 10284149 is constructed from durable material and its dimensions span 3.4 x 3.3 x 1.8 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Stabilizer Bar Insulator; Bushing; Bushings. The part 10284149 has available replacement options 10289145, 25833525. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.