Make sure this part fits

GM 15113845
Mount Bracket, Driver Side

1999-2007 GM

Customer Questions & Expert Answers (13)
GM 15113845 Mount Bracket, Driver Side
  • Part Description
    Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2007 Chevrolet Silverado 1500Base, LS, LT, WT6 Cyl 4.3 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, WT6 Cyl 4.3 L GAS
    1999-2007 GMC Sierra 1500Base, HT, SL, SLE, SLT, WT6 Cyl 4.3 L GAS
    2007 GMC Sierra 1500 ClassicSL, WT6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15113845 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15113845 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What bolts need to be removed after supporting the engine for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the engine mount to frame bolts and the two top engine mount to engine bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done to the engine for clearance to remove the engine mount for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Use the adjustable jack to raise the engine slightly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after raising and supporting the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the oil pan skid plate bolts and the plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in the installation process for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Begin by installing the engine mount bracket and its bolts, tightening them to 75 Nm (55 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the engine mount bolts for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Raise and suitably support the vehicle, then remove the oil pan skid plate bolts and the plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in the installation process for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Install the engine mount bracket, ensuring to remove all traces of the original adhesive patch and clean the bolt threads with denatured alcohol or equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for tightening the engine mount bracket bolts for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Tighten them to 75 Nm (55 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after installing the engine mount bracket for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Install the engine mount bracket bolts and tighten them to 75 Nm (55 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What are the final steps to complete the installation for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Install the engine mount-to-engine mount bracket bolts and tighten them to 65 Nm (48 ft. lbs.), then reinstall the exhaust manifold, inner wheelhouse panel, tire and wheel, and the engine protection shield if equipped, before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done if necessary after removing the engine mount for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Remove the engine mount side bracket bolts and the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done if the engine mount side bracket was removed for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Position it to the engine and install the side bracket bolts, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the engine mount bolts for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Raise and suitably support the vehicle, then remove the oil pan skid plate bolts and the plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Mount Bracket, Driver Side 15113845 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15113845 Mount Bracket, Driver Side is available in the market under the name GM Engine Mount, Engine Mount Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15113845 Mount Bracket, Driver Side fits certain Chevrolet Silverado 1500, Silverado 1500 Classic models, as well as GMC Sierra 1500, Sierra 1500 Classic models.
The original GM component designated by manufacturer part number 15113845 maintains top performance when functioning as the Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount unit at its Driver Side. The component 15113845 is constructed from durable material and its dimensions span 8.4 x 7.1 x 7.4 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15113845 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.