Make sure this part fits

GM 89026510
Seat Cushion Pad

2005-2012 GM

Customer Questions & Expert Answers (15)
GM 89026510 Seat Cushion Pad
  • Part Description
    Pad, Seat Cushion
  • Position
    Rear Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$45.52 MSRP: $67.74
You Save: $22.22 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2012 Chevrolet ColoradoLS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2005-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89026510 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89026510 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the seat back cover for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Release the lower Velcro retaining strips inside the seat cover, then remove the hog rings securing the seat back pad to the reinforcement bar at the top of the seat back.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done if replacing the pad for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Peel the heating element off of the pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done after removing the rear folding seat cushion for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Release the J-strips on the cover and take off the seat cushion cover from the seat frame/pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the process for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the rear bench seat in the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the first step in the installation process for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Secure the cover to the pad using hog rings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    If equipped, what should be installed after the seat back assembly for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Install the seat switch bezel and push the lumbar knob straight onto the shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step after installing the new seat cushion cover for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the rear folding seat cushion in the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done if the seat back has a heating element for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Disconnect the electrical connector for the seat back heating element and carefully remove the seat back pad from the frame, followed by the seat back heater element.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the next step after detaching the seat belt buckles and releasing the J-strips for the 2008 GMC Canyon? Posted by Customer
    A:
    Take off the seat cushion cover and pad from the seat frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What do you do after securing the cover to the pad for the 2010 GMC Canyon? Posted by Customer
    A:
    Place the seat cushion cover and pad over the seat frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the final step in the process for the 2009 GMC Canyon? Posted by Customer
    A:
    Reinstall the rear bench seat in the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What should be done if replacing the pad for the 2005 GMC Canyon? Posted by Customer
    A:
    Peel the heating element off of the pad, if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What needs to be disconnected next for the 2007 GMC Canyon? Posted by Customer
    A:
    Disconnect the seat belt buckle electrical connector and remove any clips or straps holding the electrical harness to the bottom of the seat cushion frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    Q:
    What is the next step after detaching the seat belt buckles and releasing the J-strips for the 2007 GMC Canyon? Posted by Customer
    A:
    Take off the seat cushion cover and pad from the seat frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Cushion Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seat Cushion Pad 89026510 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89026510 Seat Cushion Pad is available in the market under the name GM Seat Cushion Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89026510 Seat Cushion Pad fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 89026510 maintains top performance when functioning as the Pad, Seat Cushion unit at its Rear Driver Side. The component 89026510 is constructed from durable material while weighing 2.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Seat Cushion. The part 89026510 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.