Make sure this part fits

GM 89018053
Water Pump

1997-2006 GM

Customer Questions & Expert Answers (7)
GM 89018053 Water Pump
GM 89018053 Water Pump
  • Part Description
    Pump Kit, Water
  • Replaces
    12456112, 12533193, 88894345, 89018034, 89017593, 89017456, 12458934, 12369537
  • Manufacturer
    General Motors
Make sure this part fits
$234.99 MSRP: $421.50
You Save: $186.51 (45%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number89018053
    Part DescriptionPump Kit, Water
    Other NamesWater Pump Assembly
    Item Dimensions20.0 x 13.6 x 8.7 inches
    Item Weight13.90 Pounds
    ConditionNew
    Replaces12456112, 12533193, 88894345, 89018034, 89017593, 89017456, 12458934, 12369537
    ManufacturerGeneral Motors
    SKU89018053
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2002 Chevrolet CamaroZ28, Z28 SS8 Cyl 5.7 L GAS
    1997-2004 Chevrolet Corvette50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z068 Cyl 5.7 L GAS
    1998-2002 Pontiac FirebirdFormula, Trans Am8 Cyl 5.7 L GAS
    2004-2006 Pontiac GTOBase8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 89018053 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89018053 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the water pump on Chevrolet Corvette? Posted by Customer
    A:
    You should disconnect the negative Battery Cable and the connector ends for the intake air temperature and mass air flow sensors to service the Water Pump. Detach the air intake system parts and accessory Drive Belt to start work. Fill the cooling system with coolant before taking off all radiator and heater main and secondary hose clamps with their attached hoses. Untighten the six bolts fastening the Water Pump before removing it. Smoothen the gasket surfaces and secure Water Pump gaskets with their tabs facing up before mounting the Water Pump to its engine slot. The installed Water Pump bolts require tightening to 15 nm (11 ft. Lbs.) during the first phase and 30 nm (22 ft. Lbs.) at the end. Reinstall heater hoses using their clamps together with radiator inlet and outlet hoses with their retaining hardware. Add cooling liquid to the system and put on the accessory Drive Belt before placing back the air intake parts. Fit the maf and iat connectors into their right place and secure the negative Battery Cable tightly at 15 nm (11 ft. Lbs.). Put transmitter codes into the system and turn the engine on while checking for Water Pump drips.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after tightening the water pump bolts for the 2002 Chevrolet Camaro? Posted by Customer
    A:
    Connect and position the radiator inlet hose at the water pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What are the steps to remove the water pump for the 2000 Chevrolet Camaro? Posted by Customer
    A:
    Remove the water pump pulley bolts and the water pump pulley, then take out the water pump bolts and the water pump, along with the water pump gasket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What should be done after draining the cooling system for the 2004 Chevrolet Corvette? Posted by Customer
    A:
    Reposition the inlet and outlet hose clamps at the water pump and remove the inlet and outlet hoses.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the final step in the water pump replacement process for the 2001 Chevrolet Camaro? Posted by Customer
    A:
    Tighten the water pump bolts and the water pump pulley bolts to 13 Nm (115 inch lbs.) and add the engine coolant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What are the final steps to complete the water pump replacement for the 2001 Chevrolet Corvette? Posted by Customer
    A:
    Reinstall the accessory drive belt, fill the cooling system, and put back the air cleaner intake duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 89018053, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 89018053 Water Pump. It is sometimes referred to as GM Water Pump. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 89018053 Water Pump. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery