Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 26073562
Inner Tie Rod

1997-2005 GM

Customer Questions & Expert Answers (7)
GM 26073562 Inner Tie Rod
  • Part Description
    Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Tie Rod End
  • Position
    Inner
  • Manufacturer
    General Motors
Make sure this part fits
$92.60 MSRP: $187.53
You Save: $94.93 (51%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 26073562 Inner Tie Rod is Ref No. 3 in the diagram below

    1999 Pontiac Grand Am Inner Tie Rod Diagram for 26073562
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 26073562

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number26073562
    Part DescriptionRod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Tie Rod End
    Other NamesRod Kit, Steering Tie Rod Inner
    Item Dimensions19.1 x 4.0 x 3.9 inches
    Item Weight2.10 Pounds
    PositionInner
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU26073562
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile Cutlass SupremeBase6 Cyl 3.1 L GAS
    1999-2005 Pontiac Grand AmGT, GT1, SE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26073562 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26073562 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the inner tie rod on Chevrolet Classic? Posted by Customer
    A:
    Start inner Tie Rod service and repair by hoisting the vehicle before removing wheels and tires then booting the Rack And Pinion. Complete the first step by removing the Rack and Pinion Boot. Changing the rack bearing preload adjustment needs to be postponed until the inner Tie Rod separates from the steering rack for the avoidance of possible damage. Put the shock dampener off the inner Tie Rod to secure it onto the rack. Position the j 34028 inner Tie Rod wrench (J 34028) on the flats of the inner Tie Rod housing before rotating it counterclockwise to detach it from the rack through proper engagement. Remove all remnants of loctite® adhesive from the thread surfaces between the rack and the inner Tie Rod. According to procedure the shock dampener should be placed on the rack before applying loctite® to clean threads using only sufficient loctite® to cover the threads evenly. The inner Tie Rod threads need loctite® 262 (or equivalent) treatment before inner Tie Rod placement on the Rack And Pinion . The j 34028 torque wrench should be used to tighten the inner Tie Rod when holding the rack before reaching a torque of 100 nm (74 ft. Lbs.). Place the shock dampener over the inner Tie Rod housing until it reaches the lowest point against the housing before installing the Rack And Pinion boat and then proceeding with the tire and wheel reinstallation. Restore the safety stands, lower up the vehicle and verify the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for tightening the inner tie rod for the 2005 Chevrolet Classic? Posted by Customer
    A:
    Tighten the inner tie rod to 100 Nm (74 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    What is the first step to replace the outer tie rod end for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Use the J 24319-B Universal Steering Linkage Puller to separate all the tie rod ends.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    What is the torque specification for tightening the inner tie rod for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Use the pipe wrench on the rack next to the inner tie rod housing and the torque wrench with the J 34028 Inner Tie Rod Wrench to tighten the inner tie rod to 100 Nm (74 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    How do you remove the inner tie rod assembly from the rack assembly for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Place a wrench on the flats of the rack assembly and another wrench on the flats of the inner tie rod housing, then rotate the inner tie rod housing counterclockwise until it separates from the rack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    Why is it essential to hold the rack during the process for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    It is essential to hold the rack during the removal and installation of the inner tie rod to prevent damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 26073562, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 26073562 Inner Tie Rod. It is sometimes referred to as GM Tie Rod. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 26073562 Inner Tie Rod. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery