Make sure this part fits

GM 26038989
Center Link

1996-2005 GM

Customer Questions & Expert Answers (8)
GM 26038989 Center Link
  • Part Description
    Rod Kit, Steering Connecting; Drag Link
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1996-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1996-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26038989 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26038989 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the tie rod ball studs for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Loosen the clamp bolts and unscrew the assemblies to remove the tie rod ends from the adjuster tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    What should be removed after raising the 2004 Chevrolet S10? Posted by Customer
    A:
    Remove the cotter pin from the outer tie rod ball stud nut, followed by the outer and inner tie rod ball stud nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    How should the clamps be positioned on the adjuster tube for the 2002 Chevrolet S10? Posted by Customer
    A:
    Position the two clamps between the locating dimples at either end of the adjuster tube, ensuring the clamp slot is not aligned with the adjuster tube slot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    What is the final step after tightening the nuts for the 2004 Chevrolet S10? Posted by Customer
    A:
    Remove the rear axle support and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    What should be done to the threads on the ball stud and ball stud nut for the 2001 GMC Jimmy? Posted by Customer
    A:
    Clean the threads on the ball stud and ball stud nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Center Link
    Q:
    What tool is used to separate the ball joints for the 2000 GMC Jimmy? Posted by Customer
    A:
    Use the J 43631 Ball Joint Remover to detach the inner tie rods from the relay rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Center Link
    Q:
    What tools are recommended for removing the tie rod ball studs for the 2003 GMC Sonoma? Posted by Customer
    A:
    Use the J 24319-B Steering Linkage and Tie Rod Puller for the outer tie rod ball stud and the J 6627-A Tie Rod Puller for the inner tie rod ball stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Center Link 26038989 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26038989 Center Link is available in the market under the name GM Center Link, Tie Rod, Drag Link. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26038989 Center Link fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 26038989 maintains top performance when functioning as the Rod Kit, Steering Connecting; Drag Link unit. The component 26038989 is constructed from durable material and its dimensions span 32.1 x 2.0 x 2.1 inches while weighing 8.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 26038989 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.