Make sure this part fits

GM 15843019
Front Seal

2000-2011 GM

Customer Questions & Expert Answers (15)
GM 15843019 Front Seal
  • Part Description
    Seal, Hood Panel
  • Position
    Front
  • Replaces
    25664745
  • Manufacturer
    General Motors
Make sure this part fits
$22.78 MSRP: $32.59
You Save: $9.81 (31%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15843019
    Part DescriptionSeal, Hood Panel
    Item Dimensions5.2 x 5.1 x 19.5 inches
    Item Weight0.80 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25664745
    ManufacturerGeneral Motors
    SKU15843019
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2001-2003 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    2000-2005 Pontiac BonnevilleGXP, SE, SLE, SSEi6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15843019 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15843019 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the process for installing the weatherstrip for the 2010 Buick Lucerne? Posted by Customer
    A:
    Install the weatherstrip on the door opening flange, starting from the rear edge and ensuring the carrier is fully seated in the corners. Continue from the center pillar working forward, installing the weatherstrip along the roof rail and window-pillar flange, again ensuring the carrier is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do with the close-out lip for the 2009 Buick Lucerne? Posted by Customer
    A:
    With a plastic trim stick or equivalent, position the close-out lip over the interior trim around the door opening, or use the ripcord on new weatherstrip under the close-out lip to reposition it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2003 Buick LeSabre? Posted by Customer
    A:
    Place the weatherstrip over the top of the lid, press it into the rear compartment lid opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the process for installing the new window weatherstrip for the 2004 Buick LeSabre? Posted by Customer
    A:
    Install the window weatherstrip starting from the top corner and working outwards in both directions, ensuring it is firmly seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the process for installing the new weatherstrip for the 2010 Buick Lucerne? Posted by Customer
    A:
    Install the weatherstrip on the door opening flange, starting from the front edge and ensuring the carrier is fully seated in the corners. Continue from the center pillar corner working rearward, installing the weatherstrip along the roof rail and the rear of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after installing the weatherstrip on the door opening flange for the 2002 Buick LeSabre? Posted by Customer
    A:
    From the center pillar, work forward to install the weatherstrip along the roof rail and window-pillar flange, again ensuring the carrier is fully seated in the corners.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you use to position the close-out lip for the 2004 Buick LeSabre? Posted by Customer
    A:
    Use a plastic trim stick or equivalent to position the close-out lip over the interior trim around the door opening, or use the ripcord on new weatherstrip under the close-out lip to reposition it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the proper technique for rolling the weatherstrip over the flange for the 2001 Buick LeSabre? Posted by Customer
    A:
    Starting at the front, roll the weatherstrip over the flange while holding the lip to prevent tucking under the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be taken out after removing the components for the 2000 Buick LeSabre? Posted by Customer
    A:
    The rear door window and the fastener from the division post, followed by the rear door stationary window and window weatherstrip assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the old weatherstrip for the 2008 Buick Lucerne? Posted by Customer
    A:
    Begin at the rear upper corner of the door opening and pull the weatherstrip away from the door opening flange, working around the door to completely remove it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door window weatherstrip for the 2002 Buick LeSabre? Posted by Customer
    A:
    Move the window to the full down position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you position the weatherstrip for installation for the 2007 Buick Lucerne? Posted by Customer
    A:
    Position the paint dot in the upper corner of the center pillar; one paint dot indicates the RH weatherstrip starting point, while two paint dots indicate the LH weatherstrip starting point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the proper technique for rolling the weatherstrip over the flange for the 2005 Buick LeSabre? Posted by Customer
    A:
    Starting at the front, roll the weatherstrip over the flange while holding the lip to prevent tucking under.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How can you ensure the weatherstrip is properly seated for the 2011 Buick Lucerne? Posted by Customer
    A:
    Use the palm of your hand or a rubber mallet to ensure the weatherstrip is seated on the entire door opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15843019, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15843019 Front Seal. It is sometimes referred to as GM Weather Strip. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15843019 Front Seal. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery