Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15070599
Bearing Seal, Front

2001-2005 GM

Customer Questions & Expert Answers (4)
GM 15070599 Bearing Seal, Front
  • Part Description
    Seal, Front Wheel Bearing; Wheel Hub Repair Kit; Wheel Seal; Axle Seal
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 15070599 Bearing Seal, Front is Ref No. 4 in the diagram below

    2004 GMC Sonoma Bearing Seal, Front Diagram for 15070599
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15070599

  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    2001-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2001 GMC JimmyDiamond Edition, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    2001-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2001-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15070599 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15070599 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tools are required to replace the front inner axle wheel seal or bearing on Chevrolet S10? Posted by Customer
    A:
    The replacement of front drive axle inner axle seal or bearing requires slide hammer with bearing adapter (J23907) and bushing and bearing remover (J29369-1), axle bearing installer (J42211), seal installer (J42738) and universal driver handle - 3/4 in-10 (J8092). Start by elevating the vehicle followed by removing the drive shaft of the left wheel or right-wheel position while safeguarding the case from damage. First remove the left inner Axle Shaft before proceeding to remove the inner Axle Shaft seal cover. Use the bushing and bearing remover (J29369-1) to attach the back of the inner Axle Shaft bearing and then join the slide hammer (J23907) to start pulling the bearing from its place. Use a vise to hold the inner Axle Shaft seal cover while you remove the inner Axle Shaft seal by applying the bushing and bearing remover (J29369-1). Start by taking out the inner Axle Shaft and housing assembly followed by the inner Axle Shaft that is isolated in the housing on the right side. You should use bushing and bearing remover (J29369-1) with slide hammer (J23907) to extract both bearing and seal components. The installation requires the axle bearing installer (J42211) and universal driver handle (J8092) to install the bearing that possesses the square shoulder then the seal installer (J42738) for adding the new Axle Shaft seal. After reassembling the inner Axle Shaft assembly with the housing follow with the inner Axle Shaft seal cover and apply bolt torque to 25 nm (18 ft. Lbs.). Install the wheel drive shaft and check the axle lubricant before lowering the vehicle by tapping the left inner Axle Shaft into position properly.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tools are required to replace the front inner axle wheel seal or bearing on GMC Sonoma? Posted by Customer
    A:
    The replacement of front drive axle inner axle seal or bearing requires slide hammer with bearing adapter (J23907) and bushing and bearing remover (J29369-1), axle bearing installer (J42211), seal installer (J42738) and universal driver handle - 3/4 in-10 (J8092). Start by elevating the vehicle followed by removing the drive shaft of the left wheel or right-wheel position while safeguarding the case from damage. First remove the left inner Axle Shaft before proceeding to remove the inner Axle Shaft seal cover. Use the bushing and bearing remover (J29369-1) to attach the back of the inner Axle Shaft bearing and then join the slide hammer (J23907) to start pulling the bearing from its place. Use a vise to hold the inner Axle Shaft seal cover while you remove the inner Axle Shaft seal by applying the bushing and bearing remover (J29369-1). Start by taking out the inner Axle Shaft and housing assembly followed by the inner Axle Shaft that is isolated in the housing on the right side. You should use bushing and bearing remover (J29369-1) with slide hammer (J23907) to extract both bearing and seal components. The installation requires the axle bearing installer (J42211) and universal driver handle (J8092) to install the bearing that possesses the square shoulder then the seal installer (J42738) for adding the new Axle Shaft seal. After reassembling the inner Axle Shaft assembly with the housing follow with the inner Axle Shaft seal cover and apply bolt torque to 25 nm (18 ft. Lbs.). Install the wheel drive shaft and check the axle lubricant before lowering the vehicle by tapping the left inner Axle Shaft into position properly.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the axle shaft seal be installed for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Ensure the seal is driven into the bore until it is flush with the tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Bearing Seal, Front 15070599 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15070599 Bearing Seal, Front is available in the market under the name GM Wheel Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15070599 Bearing Seal, Front fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15070599 maintains top performance when functioning as the Seal, Front Wheel Bearing; Wheel Hub Repair Kit; Wheel Seal; Axle Seal unit at its Front. The component 15070599 is constructed from durable material and its dimensions span 3.8 x 3.9 x 0.3 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hub Seals; Seal. The part 15070599 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 15070599. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.