Make sure this part fits

GM 26064593
Lower Cover

2000-2011 GM

Customer Questions & Expert Answers (10)
GM 26064593 Lower Cover
  • Part Description
    Seal, Steering Column
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2009-2011 Buick LucerneSuper8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2000-2004 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2001 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    2000 Pontiac BonnevilleSE, SLE, SSEi6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26064593 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26064593 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the intermediate steering column seal on Cadillac STS? Posted by Customer
    A:
    Technician safety is paramount hence sir caution rules should be followed before replacing the intermediate steering shaft seal. The Steering Column needs removal as technicians must keep the upper intermediate shaft connected. The Steering Column removal process can begin either without jl7 or by applying jl7. Extract the intermediate steering shaft seal from its position on the mod plate. During installation mount the new intermediate shaft seal onto the mod plate while making sure the intermediate shaft seal properly seals against the mod plate. Reinstall the Steering Column according to proper installation procedures which either include or exclude application of jl7. Enable the sir system to finish its procedure.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Steering Column Seal on the intermediate steering shaft while ensuring safety on Cadillac STS? Posted by Customer
    A:
    To replace the seal of the intermediate steering we first need to observe all the safety precautions associated with restraint systems. The Steering Column must be removed attached with the upper intermediate shaft still attached to it. When taken out the steering adjust the Steering Column, then remove the intermediate shaft seal in the mod plate. For installation, fit the new intermediate shaft seal onto the mod plate such that an adequate seal is obtained between the intermediate shaft seal with mod plate. Reinstall the Steering Column and then allow the sir system according to the sir disabling and enabling zone 3 in restraint systems.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after accessing the retaining bolts for the 2006 Cadillac DTS? Posted by Customer
    A:
    Remove the retaining bolts and take out the intermediate steering shaft seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Column Seal
    Q:
    What is the order of reinstallation after replacing the seal for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Reinstall the fuel bundle into the under hood fasteners, followed by the vacuum brake booster, and finally the steering column and intermediate steering shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Column Seal
    Q:
    What should be done after installation to ensure proper function for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Operate the steering to confirm there is no binding between the intermediate steering shaft and the intermediate steering shaft seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Column Seal
    Q:
    What is the final step after installing the new seal for the 2007 Cadillac STS? Posted by Customer
    A:
    Reinstall the steering column and enable the SIR system as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Column Seal
    Q:
    How should the new intermediate shaft seal be installed for the 2006 Cadillac STS? Posted by Customer
    A:
    Place the new intermediate shaft seal onto the mod plate, ensuring a proper seal between the intermediate shaft seal and the mod plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Column Seal
    Q:
    What is the final step to complete the process for the 2010 Cadillac STS? Posted by Customer
    A:
    Enable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Column Seal
    Q:
    What should be done after removing the steering column for the 2009 Cadillac STS? Posted by Customer
    A:
    Take out the intermediate shaft seal from the mod plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Column Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Cover 26064593 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26064593 Lower Cover is available in the market under the name GM Steering Column Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26064593 Lower Cover fits certain Cadillac DTS, DeVille, STS models, as well as Buick LeSabre, Lucerne. Additionally, it is compatible with Pontiac Bonneville and Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 26064593 maintains top performance when functioning as the Seal, Steering Column unit. The component 26064593 is constructed from durable material and its dimensions span 10.1 x 4.2 x 4.0 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Coupling Shield; Seal; Boot. The part 26064593 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.