Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 29536408
Vehicle Speed Sensor

2002-2016 GM

Customer Questions & Expert Answers (63)
GM 29536408 Vehicle Speed Sensor
  • Part Description
    Sensor, Computer Control Sensors; Speed Sensor
  • Manufacturer
    General Motors
Make sure this part fits
$79.33 MSRP: $136.23
You Save: $56.90 (42%)
Ships in 1-2 Business Days
1
ADD TO CART
  • 2007 GMC Sierra 3500 HD Vehicle Speed Sensor Diagram for 29536408
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 29536408

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2015, 2002-2010 Chevrolet Silverado 1500Base, High Country, Hybrid, LS, LT, LTZ, SS, SSV, WT, XFE, Z71 Off-Road6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2002-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2002-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 29536408 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 29536408 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Vehicle Speed Sensor on a Tremec 5-Speed (TZ0) manual transmission on GMC Sierra 1500? Posted by Customer
    A:
    Initiate the replacement process of the Vehicle Speed Sensor on a tremec 5-speed transmission by properly lifting and stabilizing the vehicle. Unplug the Vehicle Speed Sensor electrical cable to retrieve both parts and the included o-ring. Apply a thin layer of synchro-mesh transmission fluid gm p/n 12345349 (Canadian P/N 10953465) or compatible product to a brand-new o-ring seal prior to applying it. Affix the vss parts along with the o-ring seal but be sure to tighten the vss correctly to the specified torque of 16 nm (12 lbsft). Reconnect the vss electrical connector afterwards when lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the right rear transfer case speed sensor for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Vehicle Speed Sensor (VSS) on the 4L60-E transmission for the 2002 Cadillac Escalade? Posted by Customer
    A:
    First, remove the harness connector and the bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the torque specification for tightening the sensor bolt for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Ensure to tighten the sensor bolt to 11 Nm (96 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be removed after raising for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Remove the transfer case shield and the electrical connector from the transfer case front speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the next step after disconnecting the electrical connector for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the output speed sensor bolt and the output speed sensor itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the final step after installing the speed sensor for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Connect the right rear speed sensor electrical connector and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the output shaft speed sensor for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Raise and support the vehicle appropriately.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after removing the transfer case shield for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Disconnect the speed sensor electrical connector and then remove the speed sensor along with the O-ring seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the torque specification for tightening the right rear speed sensor for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Tighten it to 31 Nm (23 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the front transfer case speed sensor for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    First, remove the transfer case shield if it is equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done before installing the new input speed sensor for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Lubricate the input speed sensor seal with automatic transmission fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the torque specification for tightening the front speed sensor for the 2006 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Tighten it to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How much should the speed sensor be tightened for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Tighten the sensor to 17 Nm (13 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Disconnect the vehicle speed sensor (VSS) electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Disconnect the vehicle speed sensor (VSS) electrical connector and remove the VSS along with the O-ring seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How should the output speed sensor be installed for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Ensure to install the output speed sensor bolt and tighten it to 11 Nm (96 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the output shaft speed sensor for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Raise and support the vehicle appropriately.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Disconnect the output speed sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done last if the transfer case shield was removed for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Reinstall the transfer case shield if it is equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the final step after installing the VSS for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Reconnect the VSS electrical connector and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How should the new O-ring seal be prepared before installation for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Coat a NEW O-ring seal with a thin film of Synchro-mesh transmission fluid GM P/N 12345349 (Canadian P/N 10953465) or equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the final step after installing the speed sensor for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Connect the speed sensor electrical connector and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Disconnect the speed sensor electrical connector and remove the speed sensor along with the O-ring, discarding the O-ring afterward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How should the VSS be installed for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the VSS and tighten it to 16 Nm (12 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the torque specification for installing the new speed sensor for the 2006 Chevrolet Suburban 1500? Posted by Customer
    A:
    Tighten it to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the torque specification for tightening the VSS bolt for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Disconnect the transfer case right rear electrical connector and remove the transfer case right rear speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How should the new speed sensor be inserted for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Insert the new speed sensor into the bore, aligning the hole in the retaining bracket with the bolt hole in the speed sensor boss.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the torque specification for installing the new left rear speed sensor for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Tighten it to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Disconnect the output speed sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the final step in the process for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Reconnect the external wiring harness to the speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Disconnect the right rear speed sensor electrical connector and remove the right rear speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Input Shaft Speed Sensor for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be ensured when installing the new speed sensor for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Follow the fastener notice in service precautions and tighten it to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Disconnect the VSS electrical connector and remove the VSS along with its seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done last if the transfer case shield was removed for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Reinstall the transfer case shield if it is equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the torque specification for tightening the new transfer case left rear speed sensor for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    The sensor should be tightened to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done before installing the new input speed sensor for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Lubricate the input speed sensor seal with automatic transmission fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done if the transfer case shield was removed for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reinstall the transfer case shield if it is equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the next step after lubricating the seal for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Install the input speed sensor and the bracket assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Transfer Case Speed Sensor on the BW 4482-NR4 for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    First, remove the transfer case shield if it is equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Vehicle Speed Sensor (VSS) on a 4L60-E/4L65-E transmission for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the final step after installing the VSS for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Reconnect the VSS electrical connector and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done with the O-ring seal for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Take out the O-ring seal before installing the new O-ring seal onto the VSS and coat it with a thin film of transmission fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the next step after disconnecting the electrical connector for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the input speed sensor bolt and the input speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the final step after installing the VSS for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Reconnect the VSS electrical connector and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after securing the VSS for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Reconnect the VSS electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How should the O-ring seal be prepared for installation for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Place the O-ring seal onto the VSS and coat it with a thin film of transmission fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the torque specification for installing the new left rear speed sensor for the 2005 GMC Yukon? Posted by Customer
    A:
    Tighten it to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be ensured when installing the new left rear speed sensor for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Follow the fastener notice in service precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Vehicle Speed Sensor (VSS) on the 4L60-E/4L65-E/4L70-E automatic transmission for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How should the input speed sensor bolt be installed for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Install the input speed sensor bolt and tighten it to 11 Nm (96 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2006 GMC Yukon? Posted by Customer
    A:
    Disconnect the VSS electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How should the output speed sensor be installed for the 2006 GMC Yukon? Posted by Customer
    A:
    Ensure to install the output speed sensor bolt and tighten it to 11 Nm (96 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after installing the VSS for the 2005 GMC Yukon? Posted by Customer
    A:
    Reconnect the VSS electrical connector, lower the vehicle, and refill the fluid as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is important to remember when installing the new speed sensor for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Do not rotate it in its retaining bracket to avoid improper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be ensured when installing the new speed sensor for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Use a NEW O-ring and tighten the sensor to 17 N.m (13 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done with the O-ring before inserting the new speed sensor for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Place a new O-ring on the speed sensor and lubricate it with clean transmission fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done for the 8.1L engine before removing the VSS for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Disconnect the VSS electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the front transfer case speed sensor for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    First, remove the transfer case shield if it is equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after installing the VSS for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Reconnect the VSS electrical connector, lower the vehicle, and refill the fluid as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Vehicle Speed Sensor 29536408 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 29536408 Vehicle Speed Sensor is available in the market under the name GM Vehicle Speed Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 29536408 Vehicle Speed Sensor fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 29536408 maintains top performance when functioning as the Sensor, Computer Control Sensors; Speed Sensor unit. The component 29536408 is constructed from durable material and its dimensions span 3.0 x 3.1 x 2.2 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Sensor, Speedometer Driven; Sensor, Speedometer Drive; Sensor, Speedometer. The part 29536408 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.