Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19211696
Splash Shield, Passenger Side

1991-2002 GM

Customer Questions & Expert Answers (12)
GM 19211696 Splash Shield, Passenger Side
GM 19211696 Splash Shield, Passenger Side
GM 19211696 Splash Shield, Passenger Side
GM 19211696 Splash Shield, Passenger Side
GM 19211696 Splash Shield, Passenger Side
  • Part Description
    Shield, Brake Flange Plate; Brake Dust Shield; ABS Sensor
  • Position
    Passenger Side
  • Replaces
    15715342
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 19211696 Splash Shield, Passenger Side is Ref No. 14 in the diagram below

    1996 Chevy Tahoe Splash Shield, Passenger Side Diagram for 19211696
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19211696

  • Vehicle Fitment

    Year Make Model Trim Engine
    1991-2000 Chevrolet C2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C2500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-2000 Chevrolet C3500Base, Cheyenne, LS, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2002 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1996-2002 Chevrolet Express 3500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1995-2000 Chevrolet K2500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet K2500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-2000 Chevrolet K3500Base, Cheyenne, LS, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-1999 Chevrolet TahoeBase, LS, LT8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19211696 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19211696 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the brake backing plate on Chevrolet Express 3500? Posted by Customer
    A:
    Before installing the new Brake Backing Plate, secure the pin into the park brake lever before using proper safety stands to elevate the vehicle. Begin by removing the tire and wheel and then move to remove the rear Brake Drum and rear brake shoes followed by rear Wheel Cylinder and rear brake anchor pin. The next step involves removing the rear Brake Backing Plate retaining bolts and washers to remove the Brake Backing Plate from the vehicle. Install the rear Brake Backing Plate by securing it with retaining bolts and washers tightened to 140 nm (104 ft. Lbs.). Apply high temperature silicone brake lubricant to all surfaces including Brake Shoe backing plate and its adjusting screw threads along with socket then socket face. Afterward install the rear brake shoes before moving onto the adjustment of rear brakes followed by hydraulic brake system bleeding. Reinstall the tire then the wheel before checking the park brake adjustment. Follow this braking sequence when the engine is off: apply the brake pedal two thirds of its total span and release it steadily for 15 seconds before repeating this procedure until you reach maximum braking force to achieve correct Wheel Cylinder and Brake Shoe positioning.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the brake backing plate on GMC Savana 2500? Posted by Customer
    A:
    Before installing the new Brake Backing Plate, secure the pin into the park brake lever before using proper safety stands to elevate the vehicle. Begin by removing the tire and wheel and then move to remove the rear Brake Drum and rear brake shoes followed by rear Wheel Cylinder and rear brake anchor pin. The next step involves removing the rear Brake Backing Plate retaining bolts and washers to remove the Brake Backing Plate from the vehicle. Install the rear Brake Backing Plate by securing it with retaining bolts and washers tightened to 140 nm (104 ft. Lbs.). Apply high temperature silicone brake lubricant to all surfaces including Brake Shoe backing plate and its adjusting screw threads along with socket then socket face. Afterward install the rear brake shoes before moving onto the adjustment of rear brakes followed by hydraulic brake system bleeding. Reinstall the tire then the wheel before checking the park brake adjustment. Follow this braking sequence when the engine is off: apply the brake pedal two thirds of its total span and release it steadily for 15 seconds before repeating this procedure until you reach maximum braking force to achieve correct Wheel Cylinder and Brake Shoe positioning.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the rear brake backing plate for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Take out the rear brake backing plate retaining bolts and washers, and remove the rear brake backing plate from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the first step to replace the front disc brake splash shield for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be removed after raising the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the tire and wheel assembly, followed by the brake caliper, hub, and rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What is the next step after removing the brake components for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Remove the bolts and washers from the axle, then take off the brake backing plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the first step for installation for the 2000 GMC C3500? Posted by Customer
    A:
    Place the backing plate back in position, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What comes after removing the tire and wheel assembly for the 2000 GMC C2500? Posted by Customer
    A:
    Remove the hub and bearing assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be removed after raising the 2001 GMC Savana 2500? Posted by Customer
    A:
    Remove the tire and wheel assembly, followed by the brake caliper, hub, and rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    Which splash shields need to be taken out for the 2002 GMC Savana 3500? Posted by Customer
    A:
    The splash shield for the 15 series and the splash shield for the 25 series.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    How do you install the rear brake backing plate for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Place the rear brake backing plate back in position and secure it with the retaining bolts and washers, tightening them to 140 Nm (104 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Splash Shield, Passenger Side 19211696 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19211696 Splash Shield, Passenger Side is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19211696 Splash Shield, Passenger Side fits certain Chevrolet Tahoe, C2500, C3500 models, as well as GMC Yukon, C2500, C3500 models.
The original GM component designated by manufacturer part number 19211696 maintains top performance when functioning as the Shield, Brake Flange Plate; Brake Dust Shield; ABS Sensor unit at its Passenger Side. The component 19211696 is constructed from durable material and its dimensions span 14.8 x 14.8 x 3.3 inches while weighing 2.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Speed Sensor; Shield. The part 19211696 has available replacement options 15715342. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.