Make sure this part fits

GM 15158973
Splash Shield, Rear Passenger Side

2002-2009 GM

Customer Questions & Expert Answers (13)
GM 15158973 Splash Shield, Rear Passenger Side
GM 15158973 Splash Shield, Rear Passenger Side
  • Part Description
    Shield, Rear Brake; Brake Dust Shield
  • Position
    Rear Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$35.42 MSRP: $107.60
You Save: $72.18 (68%)
Ships in 1 Business Day
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15158973 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15158973 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear disc brake backing plate on Chevrolet Trailblazer? Posted by Customer
    A:
    For this task start by lifting the vehicle to access the tire and wheel. The job starts by removing the park brake cable from the rear brake caliper and continues with the brake caliper and bracket assembly before taking out the brake rotor and park brake shoe. Rephrase the following sentence: after disassembling the components you can remove the backing plate from the axle housing by taking out the rear drive axle and backing plate nuts. After placing the backing plate onto the axle housing flange you need to fasten it with the backing plate nuts and tighten them to 135 nm (100 ft. Lbs.). First place back the rear drive axle components before adding the park brake shoe and rear brake rotor. Complete the reinstall with the brake caliper and bracket assembly. Reconnect the park brake cable to the rear brake caliper then adjust the park brake shoe. Finally attach the wheel and tire components on the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2005 Buick Rainier? Posted by Customer
    A:
    Reconnect the park brake cable to the rear brake caliper, adjust the park brake shoe, and put the tire and wheel assembly back on before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the next step after installing the splash shield for the 2005 Buick Rainier? Posted by Customer
    A:
    Reinstall the front hub and bearing assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What is the next step after removing the brake components for the 2004 Chevrolet SSR? Posted by Customer
    A:
    Take out the rear drive axle and the retaining nuts from the backing plate before removing the backing plate from the rear axle housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the next step after installing the new splash shield for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Reinstall the front hub and bearing assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What components need to be removed after detaching the park brake cable for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Remove the brake caliper and bracket assembly, followed by the rear brake rotor and park brake shoe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the next step after installing the splash shield for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Reinstall the front hub and bearing assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be done after reinstalling the front hub and bearing assembly for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Reinstall the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What is the first step in the installation process for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Attach the backing plate to the axle housing flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be done after removing the tire and wheel assembly for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Take out the front hub and bearing assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    How do you reinstall the wheel cylinder and park brake cables for the 2004 GMC Envoy? Posted by Customer
    A:
    Reinstall the wheel cylinder and the park brake cables, using the appropriate replacements for the left and right cables.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    How should the retaining bolts be tightened for the 2006 GMC Envoy? Posted by Customer
    A:
    Ensure they are tightened similarly to the wheel hub and bearing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Splash Shield, Rear Passenger Side 15158973 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15158973 Splash Shield, Rear Passenger Side is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15158973 Splash Shield, Rear Passenger Side fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15158973 maintains top performance when functioning as the Shield, Rear Brake; Brake Dust Shield unit at its Rear Passenger Side. The component 15158973 is constructed from durable material and its dimensions span 16.6 x 16.3 x 1.5 inches while weighing 1.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shield; Shield, Brake Flange Plate. The part 15158973 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.