Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15736666
Lower Shroud

1994-2005 GM

Customer Questions & Expert Answers (7)
GM 15736666 Lower Shroud
GM 15736666 Lower Shroud
GM 15736666 Lower Shroud
  • Part Description
    Shroud, Radiator Fan Shroud
  • Position
    Lower
  • Replaces
    15708284, 15731696
  • Manufacturer
    General Motors
Make sure this part fits
$79.87 MSRP: $125.10
You Save: $45.23 (37%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 15736666 Lower Shroud is Ref No. 11 in the diagram below

    1996 GMC Sonoma Lower Shroud Diagram for 15736666
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15736666

  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1994-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR56 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1994-2004 GMC SonomaSL, SLE, SLS6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15736666 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15736666 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fan shroud on Chevrolet Blazer? Posted by Customer
    A:
    Begin the Fan Shroud replacement by unbolting the upper shroud along with extracting the coolant recovery reservoir hose mounted on the lower shroud before removing the upper shroud from the vehicle. A person should lift the lower Fan Shroud with minimal force until the locating tabs release from the Radiator before extracting it from the vehicle. When installing the Fan Shroud begin by placing the lower shroud against the Radiator components before setting the locating tabs by pressing down on the Fan Shroud. Install the upper Fan Shroud next. Before hooking up the coolant recovery reservoir hose to the lower Fan Shroud it is crucial to install and torque the upper Fan Shroud bolts to 10 nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fan shroud on Chevrolet S10? Posted by Customer
    A:
    Start by taking out the bolts of the upper Fan Shroud while disconnecting the coolant recovery reservoir hose from the lower Fan Shroud. The installation process begins by removing the upper Fan Shroud followed by lifting the lower Fan Shroud until locating tabs break free from the Radiator then the unit may be extracted from the vehicle. Install the lower Fan Shroud by placing it against the Radiator then activate its locating tabs through Fan Shroud downward pressure. Attach the upper Fan Shroud while tightening its bolts to 10 nm (89 inch lbs.). The coolant recovery reservoir hose needs to be connected back to the lower Fan Shroud during the last step of installation.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Properly Service and Repair the Fan Shroud on Chevrolet S10? Posted by Customer
    A:
    The first step to replace the Fan Shroud involves air intake duct assembly removal from the 2.2l vehicle by unclamping air ducts and removing air duct rivets until the intake duct assembly can be extracted from the Fan Shroud. Start by removing the upper Fan Shroud screws followed by detaching the coolant recovery reservoir hose from the lower Fan Shroud after which you can lift the lower Fan Shroud until the locating tabs release from the Radiator then take it off the vehicle. To install insert the lower Fan Shroud to the Radiator and apply pressure through the Fan Shroud tabs to set them inside the Radiator. The upper Fan Shroud should be installed through its attaching screws which need to be tightened to 10 nm (89 inch lbs.). The vehicle needs its coolant recovery reservoir hose attaching to the lower Fan Shroud while customers with 2.2l engines must install the air intake duct assembly through Fan Shroud air duct clamp loosening followed by air duct rivets removal then intake duct assembly retrieval from the shroud and finally duct installation and air duct clamp tightening of 5 nm (44 inch lbs.) before rivet refit.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fan shroud on GMC Jimmy? Posted by Customer
    A:
    Fans who operate the 2.2 l model must begin by removing the intake duct assembly through air duct clamp loosening and air duct rivet removal then taking out the assembly from the Fan Shroud. First disconnect the coolant recovery reservoir hose from the lower Fan Shroud while taking out the upper Fan Shroud screws before lifting the lower Fan Shroud enough to disengage its locating tabs from the Radiator and then remove it from the car. Place the bottom Fan Shroud directly against the Radiator after you insert the locating tabs through the openings. Position the upper Fan Shroud in place before securing it with attaching screws at 10 nm (89 inch lbs.) tension and reconstruct the coolant recovery reservoir hose to the lower Fan Shroud. The installation of the 2.2 l intake duct assembly requires loosening the air duct clamps as well as removing the air duct rivets prior to extracting the intake duct assembly from the Fan Shroud. Replace the intake air ducts after clamping them to 5 nm (44 inch lbs.) torque and reinserting the rivets.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fan shroud on GMC Sonoma? Posted by Customer
    A:
    Before Fan Shroud replacement start with the air intake duct assembly from the 2.2l engine by unscrewing clamps first then unpinning push clamps and extracting the duct from the Fan Shroud. The procedure requires removal of upper Fan Shroud bolts before disconnection of the coolant recovery reservoir hose from the lower Fan Shroud to complete an upper Fan Shroud uninstallation. The Fan Shroud requires elevation until its Radiator locating tabs break free so you can extract the shroud from the vehicle. Place the lower Fan Shroud next to the Radiator while pushing on the Fan Shroud to secure its locating tabs. Put the upper Fan Shroud into position before securing its bolts to 10 nm (89 inch lbs.). Reinstall the coolant recovery reservoir hose to the lower Fan Shroud while users must also install the air intake duct assembly if their vehicle features the 2.2l engine and tighten the intake air duct clamps to 5 nm (44 inch lbs.). Altogether push in the push pins as the last installation step.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the installation process for the 2000 GMC Jimmy? Posted by Customer
    A:
    Connect the coolant recovery reservoir hose to the lower fan shroud and finally install the air inlet duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fan Shroud
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Shroud 15736666 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15736666 Lower Shroud is available in the market under the name GM Fan Shroud. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15736666 Lower Shroud fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15736666 maintains top performance when functioning as the Shroud, Radiator Fan Shroud unit at its Lower. The component 15736666 is constructed from durable material and its dimensions span 29.3 x 13.7 x 8.8 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Fan Shroud. The part 15736666 has available replacement options 15708284, 15731696. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.