Make sure this part fits

GM 89017761
Starter

2006-2008 GM

Customer Questions & Expert Answers (5)
GM 89017761 Starter
  • Part Description
    Starter Assembly, (Remanufacture) (Pg260D); Starter Motor
  • Manufacturer
    General Motors
Make sure this part fits
$247.07 MSRP: $455.38
You Save: $208.31 (46%)
Core Charge: $45.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number89017761
    Part DescriptionStarter Assembly, (Remanufacture) (Pg260D); Starter Motor
    Other NamesStarter, Starter Motor
    Item Dimensions6.2 x 6.1 x 12.1 inches
    Item Weight7.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU89017761
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Buick TerrazaCX, CXL6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2007 Chevrolet ImpalaLS, LT, LTZ, Police6 Cyl 3.5 L FLEX, 6 Cyl 3.9 L GAS
    2006-2007 Chevrolet Monte CarloLS, LT, LTZ6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2006-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006 Pontiac MontanaSV66 Cyl 3.9 L GAS
    2006-2007 Saturn Relay1, 2, 36 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 89017761 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89017761 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the starter motor on Chevrolet Uplander? Posted by Customer
    A:
    The replacement process for the Starter motor starts with disconnecting the battery negative cable. Start by removing the radiator air baffle and the engine to transmission brace at the rear left part of the engine. First remove the transaxle converter cover bolt then take off the transaxle converter cover. First disconnect the engine harness electrical connector from the Starter then remove the engine harness ground nut and the engine harness ground. Start by loosening the Starter motor "bat" terminal nut before removing the positive Battery Cable (3, 6) and engine harness from the Starter motor "bat" terminal. The Starter motor "s" terminal requires both its "s" terminal nut and the engine harness removed from the "s" terminal before removing its Starter bolts and Starter itself. During electrical connections always double-check the nut located next to the bat terminal cap because tightening it properly will prevent damage to the solenoid. Install the Starter motor into the engine while tightening each bolt to 40 n.m torque (30 lb ft). Connect the engine harness to the Starter motor "s" terminal before installing and fixing the Starter motor "s" terminal nut to 3 n.m (27 lb in). Twist the Starter motor's "bat" terminal nut to 17 n.m (13 lb ft) after attaching the engine harness and positive battery cables (6, 3). The Starter receives its electrical connection through the engine harness electrical connector while the engine harness ground requires installation followed by a tightening of the ground nut to 20 n.m (15 lb ft). Place back the transaxle converter cover bolt and transaxle converter cover while securing the bolt with 10 n.m of torque (89 lb in). To complete the installation the engine-to-transmission brace must be returned to the rear left side of the engine while also reinstalling the radiator air baffle and reattaching the negative Battery Cable.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the terminal nuts and harness for the 2007 Buick Terraza? Posted by Customer
    A:
    Remove the starter motor bolts and take out the starter motor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Starter
    Q:
    What needs to be removed after disconnecting the negative battery cable for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Remove the front lower air deflector panel and the torque converter cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Starter
    Q:
    What should be connected after installing the starter motor for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Connect the starter motor electrical connector and install the engine harness terminal to the starter motor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Starter
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 89017761, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 89017761 Starter. It is sometimes referred to as GM Starter. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 89017761 Starter. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery