Make sure this part fits

GM 25638820
Striker, Rear

1998-2005 GM

Customer Questions & Expert Answers (16)
GM 25638820 Striker, Rear
  • Part Description
    Striker, Rear Compartment Lid
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2000-2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    1998-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2001-2003 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    2000-2005 Pontiac BonnevilleGXP, SE, SLE, SSEi6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25638820 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25638820 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after positioning the striker for the 2001 Buick LeSabre? Posted by Customer
    A:
    Secure the striker fasteners and align the door striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step in the installation process for the 2004 Buick LeSabre? Posted by Customer
    A:
    Tighten the striker fasteners to 28 N.m (21 lb ft), while adhering to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the required torque for tightening the fasteners for the 2003 Buick LeSabre? Posted by Customer
    A:
    Tighten the fasteners to 28 N.m (21 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after positioning the striker for the 2003 Buick LeSabre? Posted by Customer
    A:
    Secure the striker fasteners and align the door striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done at the end of the installation process for the 2000 Buick LeSabre? Posted by Customer
    A:
    Finally, adjust the lock striker to ensure proper alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step in the installation process for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Load the anchor plate into the rear pillar chute.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How should the door striker be aligned and secured for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Align the door striker and tighten the two striker fasteners to 27 N.m (20 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be ensured during installation for the 2001 Cadillac Seville? Posted by Customer
    A:
    Ensure proper striker alignment to avoid excessive door effort or damage that could lead to personal injury.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step in the process for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Reinstall the seat back.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after positioning the spacer and striker for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Install the striker fasteners.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the next step after removing the door striker for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Take out the rear seat back.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the front door striker for the 2002 Cadillac Seville? Posted by Customer
    A:
    Observe the striker location and the number of spacers before removing the striker bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be ensured during installation for the 2000 Cadillac Seville? Posted by Customer
    A:
    Ensure proper striker alignment to avoid excessive door efforts or damage to the door system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step in the process for the 2002 Cadillac Seville? Posted by Customer
    A:
    Reinstall the seat back.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the rear door striker anchor plate for the 2005 Buick LeSabre? Posted by Customer
    A:
    First, remove the door striker and the rear seat back.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Striker, Rear 25638820 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25638820 Striker, Rear is available in the market under the name GM Door Striker. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25638820 Striker, Rear fits certain Cadillac DeVille, Seville models, as well as Buick LeSabre. Additionally, it is compatible with Pontiac Bonneville and Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 25638820 maintains top performance when functioning as the Striker, Rear Compartment Lid unit at its Rear. The component 25638820 is constructed from durable material and its dimensions span 5.7 x 5.7 x 3.2 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Striker, Rear Compartment Lid Lock Or Liftgate. The part 25638820 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.