Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19259976
Mirror Switch, Rear

1998-2005 GM

Customer Questions & Expert Answers (10)
GM 19259976 Mirror Switch, Rear
GM 19259976 Mirror Switch, Rear
GM 19259976 Mirror Switch, Rear
GM 19259976 Mirror Switch, Rear
GM 19259976 Mirror Switch, Rear
GM 19259976 Mirror Switch, Rear
  • Part Description
    Switch, Rear View Mirror; Power Mirror Switch
  • Position
    Rear
  • Replaces
    15013100, 15720520
  • Manufacturer
    General Motors
Make sure this part fits
$56.11 MSRP: $87.90
You Save: $31.79 (37%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 19259976 Mirror Switch, Rear is Ref No. 10 in the diagram below

    1998 Oldsmobile Bravada Mirror Switch, Rear Diagram for 19259976
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19259976

  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1998-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1998-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19259976 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19259976 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace a Power Folding Mirror Switch on Chevrolet Blazer? Posted by Customer
    A:
    The first step to replace the power folding outside Mirror Switch requires disconnecting the battery negative cable. A flat-bladed tool should be used to gently remove the leading fold edge of the power folding outside Mirror Switch. Beginning the installation process requires users to separate the accessory switch panel from the armrest by lifting the front leading edge cover while maintaining the electrical system resistance. Disconnect the electrical connector which powers the power folding Mirror Switch. Start installation by connecting the power folding Mirror Switch electrical connector and proceeding to put the power accessory switch mounting panel on the armrest with retainer locks securing the parts correctly. Reconnect the battery negative cable after fitting the power folding Mirror Switch to the door trim panel followed by the button installation on the door trim panel which needs retainers to remain locked into place.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Folding Outside Mirror Switch on Chevrolet S10? Posted by Customer
    A:
    The first step before replacing the power folding outside Mirror Switch is to disconnect the negative cable from the battery. A flat-bladed tool should be used to gently lift the leading part of the folding outside Mirror Switch. Proceed by taking out the accessory switch panel from the armrest through front edge prying of the cover while maintaining proper electrical connectivity. Remove the electrical power connector from the power folding Mirror Switch. Begin by attaching the electrical connector to the power folding Mirror Switch before installing the power accessory switch mounting panel to the armrest correctly. Place the power folding Mirror Switch onto the door trim panel while making sure the retainers safely lock into position and then attach the battery negative cable.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power mirror switch on Chevrolet S10? Posted by Customer
    A:
    Before replacing the power mirror switch the technician must use a flat-bladed tool to free the outside mirror switch retaining tabs on the trim panel before removing the switch and disconnecting the electrical connector from the power folding mirror switch. To install the power folding mirror switch first attach the electrical connector followed by fitting the switch to the door trim panel while applying force to keep the retaining tabs in a fully seated position.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Folding Outside Mirror Switch on GMC Jimmy? Posted by Customer
    A:
    The replacement process of a power folding outside Mirror Switch requires users to disconnect the battery negative cable first. The leading edge of the folding outside Mirror Switch needs a flat-bladed tool to lift it before proceeding to remove the accessory switch panel from the armrest through careful front-edge prying that maintains electrical connection. The first step involves disconnecting the electrical connector which is attached to the power folding Mirror Switch. Connect the electrical connector to the power folding Mirror Switch and move on to installing the power accessory switch mounting panel onto the armrest until the retainers achieve secure lock. Reattach the battery negative cable before installing the power folding Mirror Switch into the door trim panel where retainers need to lock into position.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Folding Outside Mirror Switch on GMC Sonoma? Posted by Customer
    A:
    The first step for replacing the power folding outside Mirror Switch includes disconnecting the battery negative cable. A flat-bladed tool should be used to gently lift up the leading edge of the folding outside Mirror Switch. The next procedure requires prying up the accessory switch panel from the armrest at its front leading edge without breaking electrical connections. Before installing the power folding Mirror Switch you must detach its electrical connector. Toward installation connect the electrical connector to the power folding Mirror Switch followed by attaching the power accessory switch mounting panel onto the armrest where retainers should lock securely. Fitting the power folding Mirror Switch onto the door trim panel requires confirmation that retainers securely lock in position before reattaching the battery negative cable.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Change the Mirror Switch on a GMC Sonoma? Posted by Customer
    A:
    To replace the power folding outside Mirror Switch, unhook the negative cable of the battery first. Slowly lift up the leading edge of the folding outside Mirror Switch on the flat-bladed tool and remove the accessory switch panel from the arm rest by pulling-up plastic cover at the front leading edge, without breaking wires. Then, unplug the electrical connector from the power folding Mirror Switch. To install, connect the electrical connector to the power folding Mirror Switch, and install the power accessory switch mounting panel onto the armrest, with the retainers locking into place. Install the power folding Mirror Switch to the door trim panel again making sure that the retainers are locked, and finally reconnect the negative Battery Cable.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the switches and the button assembly for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Connect the electrical connectors to the switches in the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Mirror Switch
    Q:
    What should be done to ensure the switch is properly secured for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Apply downward pressure to ensure the retaining tabs are fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Mirror Switch
    Q:
    How do you install the power accessory switch mounting panel for the 2001 GMC Jimmy? Posted by Customer
    A:
    Install it to the armrest, ensuring the retainers lock into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Mirror Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Mirror Switch, Rear 19259976 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19259976 Mirror Switch, Rear is available in the market under the name GM Mirror Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19259976 Mirror Switch, Rear fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 19259976 maintains top performance when functioning as the Switch, Rear View Mirror; Power Mirror Switch unit at its Rear. The component 19259976 is constructed from durable material and its dimensions span 3.1 x 2.1 x 2.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch; Switch, Rear View Mirror - Inside & Outside. The part 19259976 has available replacement options 15013100, 15720520. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.