Make sure this part fits

GM 22604283
Window Switch

1997-2005 GM

Customer Questions & Expert Answers (9)
GM 22604283 Window Switch
GM 22604283 Window Switch
  • Part Description
    Switch, Door Window
  • Position
    Front
  • Replaces
    22636572
  • Manufacturer
    General Motors
Make sure this part fits
$19.33 MSRP: $30.28
You Save: $10.95 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile Cutlass Supreme6 Cyl 3.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22604283 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22604283 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the left front power window switch on Chevrolet Classic? Posted by Customer
    A:
    Start the procedure of replacing the left front power window switch by using a flat-bladed tool to detach the power accessory switch plate retainers by pushing then lifting them up to extract the switch plate from the door trim panel. You need to remove the electrical connectors from the power window switch followed by releasing the power window switch retainers for adequate switch plate access. Install the power window switch into the accessory switch plate while pressing down until all retaining tabs find their correct position. The process of installation ends by reconnecting the electrical connectors to the power window switch after inserting the accessory switch plate back onto the door trim panel while pressing until all retainers are fully seated.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the driver side power window switch on Chevrolet Malibu? Posted by Customer
    A:
    The driver side power window switch serves as part of the master power window control assembly thus it requires replacement of the entire assembly because service separate from the unit is not possible. A small flat-bladed tool must be used to lift and push the power accessory panel retainer clips out from the door trim panel beginning at its front side. Remove the power window switch from the panel by disconnecting electric connectors from the switch first then releasing both retainers attached to the switch. The installation process requires sliding the power window switch into the accessory panel until all retainer tabs fully receive it before connecting the electrical connectors to the switch. Squeeze the power accessory panel onto the door trim panel until all retainers find their place.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the left front power window switch on Chevrolet Malibu? Posted by Customer
    A:
    The first step to service the left front power window switch begins with using a flat-bladed implement to activate the power accessory switch plate retainers by pushing in and lifting up. This enables removal of the switch plate from the door trim panel. Unplug the electrical connectors which power the power window switch then free the retainers before pushing the window switch out of the accessory switch plate. After installing the power window switch onto the accessory switch plate, gradually press down until all retaining tabs find full engagement. Connect and attach the electrical connectors to the power window switch and reposition the accessory switch plate onto the door trim panel by pressing it until all retainers become secure.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the bezel from the switch for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Release the retainers with the flat bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    How do you remove the bezel from the switch for the 2005 Chevrolet Classic? Posted by Customer
    A:
    Release the retainers with the flat bladed tool to remove the bezel from the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    How do you install the power window switch back into the door trim panel for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Press it until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the first step to replace the front side door window switch on the left door for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Remove the power accessory switch panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the first step for installation for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Press the bezel onto the switch until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Switch 22604283 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22604283 Window Switch is available in the market under the name GM Power Window Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22604283 Window Switch fits certain Chevrolet Malibu, Classic models, as well as Oldsmobile Cutlass, Cutlass Supreme models.
The original GM component designated by manufacturer part number 22604283 maintains top performance when functioning as the Switch, Door Window unit at its Front. The component 22604283 is constructed from durable material and its dimensions span 3.2 x 2.0 x 2.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch. The part 22604283 has available replacement options 22636572. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.