Make sure this part fits

GM 25919498
Drip Weatherstrip, Rear

1996-2024 GM

Customer Questions & Expert Answers (55)
GM 25919498 Drip Weatherstrip, Rear
  • Part Description
    Weatherstrip Assembly-Rear Side Door Roof Drip
  • Position
    Rear
  • Replaces
    15026331, 15821955
  • Manufacturer
    General Motors
Make sure this part fits
$87.29 MSRP: $129.93
You Save: $42.64 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2014 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 GMC Savana 2500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 GMC Savana 3500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25919498 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25919498 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the new weatherstrip be installed for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Install the new weatherstrip by starting at the corners to align it with the door opening pinch-weld flange, ensuring it does not pull away at the corners. Press the weatherstrip onto the flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What are the final steps after installing the weatherstrip for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Reinstall the hinge pillar upper garnish, hinge pillar lower garnish molding, passenger side front corner garnish molding, passenger side body side trim panel, and the side door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the weatherstrip on the drip rail for the 2005 Chevrolet Express 3500? Posted by Customer
    A:
    First, remove the weatherstrip from the roof rail and take out the weatherstrip retainers from the holes in the roof rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you secure the new weatherstrip in place for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Press the retainers into the holes in the door to secure it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the side door opening weatherstrip for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    First, remove the hinge pillar upper garnish, hinge pillar lower garnish molding, passenger side front corner garnish molding, passenger side body side trim panel, and the side door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the weatherstrip from the door for the 2011 Chevrolet Express 2500? Posted by Customer
    A:
    Pull the weatherstrip to remove it from the channel on the side of the door, then take out the weatherstrip and retainers from the bottom of the door, ensuring to clean off all old adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the cargo door seal for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Open the cargo door and pull the seal from the cargo door opening pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How do you install the rear hood seal for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Align the slot in the rear hood seal with the cowl pinch weld flange and press the rear hood seal into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the flange be prepared before installing a new seal for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Clean all adhesive from the flange using GM P/N 8984 adhesive remover or an equivalent product.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What is the next step after removing the old weatherstrip for the 2004 Chevrolet Express 3500? Posted by Customer
    A:
    Install the new weatherstrip onto the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the old door opening weatherstrip for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Gently pull the door opening weatherstrip from the door opening pinch-weld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after pressing the weatherstrip into place for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    If reinstalling the original weatherstrip, apply GM weatherstrip adhesive GM P/N 12345097 (Canadian P/N 10953479) at the bottom ends to secure it to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the cargo door seal for the 2006 Chevrolet Express 2500? Posted by Customer
    A:
    Open the cargo door and pull the cargo door seal from the cargo door opening pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the retainers for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Install the new weatherstrip onto the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be applied to the new weatherstrip before installation for the 2011 Chevrolet Express 1500? Posted by Customer
    A:
    Apply GM P/N 12345097 (Canadian P/N 10953479) or an equivalent into the channel on the new weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the old door opening weatherstrip for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Gently pull the door opening weatherstrip from the door opening pinch-weld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Reattach the side door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What adhesive should be used for the new weatherstrip for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Apply GM P/N 12345097 (Canadian P/N 10953479) or an equivalent adhesive into the channel on the new weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be sprayed inside the sealing strip for installation for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    A water and soap solution per GM P/N 9985662, or equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new weatherstrip be installed for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Start at the corners to align it with the door opening pinch-weld flange, ensuring it does not pull away at the corners, and then press the weatherstrip onto the flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the Front Side Door Roof Drip Weatherstrip for the 2011 Chevrolet Express 3500? Posted by Customer
    A:
    First, remove the weatherstrip from the roof rail and take out the weatherstrip retainers from the holes in the roof rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How can you ensure full engagement of the seal to the flange for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Use a rubber mallet to ensure full engagement of the seal to the flange, ensuring it is not kinked at the corners of the door openings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How do you remove the sealing strip on the front door upper for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Gently pull on the weatherstrip to remove it from the door pillar, then take out the weatherstrip retainers from the holes in the door pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear side door weatherstrip for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    First, remove the pins that secure the weatherstrip to the upper door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2006 Chevrolet Express 3500? Posted by Customer
    A:
    Position the weatherstrip onto the pillar and press the retainers in the weatherstrip into the holes in the door pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after positioning the weatherstrip for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Install the retainers at the ends of the weatherstrip into the holes in the floor panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new left side rear door upper weatherstrip for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Position the new weatherstrip onto the door and firmly press the retainers into the holes to secure it in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new seal be installed for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Guide the seal through the opening between the body and the hinges, then install it starting at the top center of the liftgate opening, positioning it against the pinch-weld flange and working down both sides towards the bottom center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How do you install the new weatherstrip for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Position the weatherstrip onto the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you apply to the new weatherstrip during installation for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Apply a mild soap and water solution to the new weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the upper trim panel for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Next, take out the hinged body side window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new seal be installed for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Guide the seal through the opening between the body and the hinges, then install it starting at the top center of the liftgate opening, positioning it against the pinch-weld flange and working down both sides towards the bottom center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How do you install the weatherstrip for the 2001 GMC Savana 1500? Posted by Customer
    A:
    Place the weatherstrip onto the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What components need to be reinstalled after the weatherstrip installation for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the rear door opening frame garnish molding, the rear floor trim plate, the passenger side rear corner trim panel, the driver side body side rear trim panel, and finally the rear corner garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sliding door weatherstrip for the 2010 GMC Savana 1500? Posted by Customer
    A:
    First, remove the weatherstrip from the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the weatherstrip for the 2011 GMC Savana 1500? Posted by Customer
    A:
    Take out the weatherstrip retainers from the holes in the door pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Reinstall the rear door opening frame garnish molding, the rear floor trim plate, the passenger side rear corner trim panel, the driver side body side rear trim panel, and finally the rear corner garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you secure the new weatherstrip in place for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Press the retainers in the left rear door weatherstrip into the holes in the left rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you ensure while pressing the weatherstrip onto the flange for the 2004 GMC Savana 1500? Posted by Customer
    A:
    It does not pull away at the corners.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the installation process for the weatherstrip for the 2011 GMC Savana 2500? Posted by Customer
    A:
    Position the weatherstrip onto the door and press the retainers in the weatherstrip into the holes in the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sliding door window weatherstrip for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Remove the sliding side door upper trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after securing the top of the weatherstrip for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Install the retainer at the top of the weatherstrip to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the rear hood seal for the 2010 GMC Savana 2500? Posted by Customer
    A:
    First, pull up on the rear hood seal and remove it from the cowl pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the right rear door weatherstrip for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Use 3M Release Agent or an equivalent to detach the weatherstrip from the top of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new seal be installed for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Guide the seal through the opening between the body and the hinges, then install it starting at the top center of the liftgate opening, positioning it against the pinch-weld flange and working down both sides towards the bottom center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What is the first step to replace the sliding door weatherstrip for the 2011 GMC Savana 3500? Posted by Customer
    A:
    Remove the weatherstrip from the sliding side door and take out the weatherstrip retainers from the holes in the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the weatherstrip from the door for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Pull it out from the channel on the side and take off the retainers from the bottom.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new side door window weatherstrip for the 2009 GMC Savana 3500? Posted by Customer
    A:
    Place the new side door window weatherstrip onto the window opening pinch-weld flange and press it into position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do with the retainers during installation for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Press the retainers into the holes in the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after seating the top pins for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Insert the pin located on the pocket into the door sheet metal until fully seated, again checking for gaps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the side door opening weatherstrip for the 2002 GMC Savana 3500? Posted by Customer
    A:
    First, remove the hinge pillar upper garnish, hinge pillar lower garnish molding, side door opening frame garnish molding, passenger side front corner garnish molding, passenger side body side trim panel, and the side door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you prepare the new weatherstrip for installation for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Apply weatherstrip adhesive into the channel on the new side door opening weatherstrip using GM P/N 12345097 (Canadian P/N 10953479) or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next item to remove after the pillar garnish moldings for the 2005 GMC Savana 3500? Posted by Customer
    A:
    The front door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be aligned during installation for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Start at the corners to align the weatherstrip with the door opening pinch-weld flange, ensuring it does not pull away at the corners while pressing it onto the flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Drip Weatherstrip, Rear 25919498 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25919498 Drip Weatherstrip, Rear is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25919498 Drip Weatherstrip, Rear fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 25919498 maintains top performance when functioning as the Weatherstrip Assembly-Rear Side Door Roof Drip unit at its Rear. The component 25919498 is constructed from durable material and its dimensions span 63.0 x 3.1 x 3.0 inches while weighing 3.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Side Door Opening. The part 25919498 has available replacement options 15026331, 15821955. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.