Make sure this part fits

GM 15126641
Weatherstrip, Driver Side

2003-2014 GM

Customer Questions & Expert Answers (45)
GM 15126641 Weatherstrip, Driver Side
  • Part Description
    Weatherstrip, Door Weatherstrip; Door Seal
  • Position
    Driver Side
  • Replaces
    25754301
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 GMC Savana 3500Base, LS, LT, SLE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15126641 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15126641 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the weatherstrip for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the weatherstrip retainers from the holes in the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you complete the installation for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Tuck the bottom inner edge of the weatherstrip into the top door flange to complete the installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the butt joint seam be installed for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Install the butt joint seam at the center of the bottom pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What should be done after pressing the weatherstrip into place for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Install the retainers at the ends into the door opening holes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new weatherstrip for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Reinstall the front door stepwell mat, the front door lower pillar garnish molding, the front door upper pillar garnish molding, and finally the hinge pillar trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be noted when installing a new cargo door seal for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    A mastic sealer glue is included, so do not use weatherstrip adhesive; however, if reusing the seal, apply weatherstrip adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What are the final steps after pressing the weatherstrip into place for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Install the retainers at the ends, and reattach the hinge pillar upper garnish, hinge pillar lower garnish molding, passenger side front corner garnish molding, passenger side body side trim panel, and the side door stepwell mat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be applied to the new weatherstrip before installation for the 2011 Chevrolet Express 1500? Posted by Customer
    A:
    Apply GM P/N 12345097 (Canadian P/N 10953479) or an equivalent into the channel on the new weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the old door opening weatherstrip for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Gently pull the door opening weatherstrip from the door opening pinch-weld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Install the new side rear door lower weatherstrip onto the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the sealing strip on the front door upper for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Gently pull on the weatherstrip to remove it from the door pillar, then take out the weatherstrip retainers from the holes in the door pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2011 Chevrolet Express 3500? Posted by Customer
    A:
    Place the weatherstrip into the roof rail, then press the retainers into the weatherstrip and into the holes in the roof rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the butt joint seam be installed for the 2006 Chevrolet Express 2500? Posted by Customer
    A:
    Install the butt joint seam at the center of the bottom pinch-weld flange and use a rubber mallet to ensure full engagement of the cargo door seal to the pinch-weld flange, ensuring that the seal is not kinked at the corners of the door openings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the seal for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Close the cargo door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What is the final step in the installation process for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Reinstall the rear door opening frame garnish molding, rear floor trim plate, passenger side rear corner trim panel, driver side body side rear trim panel, and finally the rear corner garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What adhesive should be used if reusing the old weatherstrip for the 2011 Chevrolet Express 2500? Posted by Customer
    A:
    Use GM Weatherstrip Adhesive GM P/N 12345097 (Canadian P/N 10953479) or an equivalent to secure the top of the weatherstrip to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new weatherstrip be installed for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Start at the corners to align it with the door opening pinch-weld flange, ensuring it does not pull away at the corners, then press the weatherstrip onto the flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after installing the new weatherstrip for the 2004 Chevrolet Express 3500? Posted by Customer
    A:
    Press the retainers in the weatherstrip into the holes in the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after pressing the weatherstrip into place for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    If reinstalling the original weatherstrip, apply GM weatherstrip adhesive GM P/N 12345097 (Canadian P/N 10953479) at the bottom ends to secure it to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the intermediate side door window weatherstrip for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    First, remove the side door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the weatherstrip on the drip rail for the 2005 Chevrolet Express 3500? Posted by Customer
    A:
    First, remove the weatherstrip from the roof rail and take out the weatherstrip retainers from the holes in the roof rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the front door upper weatherstrip for the 2006 Chevrolet Express 3500? Posted by Customer
    A:
    Gently pull the weatherstrip away from the door pillar to remove it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the door opening weatherstrip for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Gently pull it from the door opening pinch-weld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after aligning the pins for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Insert the pocket over the door flange and push down the pins until fully seated, ensuring there are no gaps between the door and the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you begin replacing the Front Side Door Upper Auxiliary Sealing Strip for the 2011 GMC Savana 1500? Posted by Customer
    A:
    Start by removing the weatherstrip from the door pillar by gently pulling on it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done for clearance around body structure reinforcements for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Cut slots as necessary for clearance around body structure reinforcements.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    What is the final step in the process for the 2009 GMC Savana 3500? Posted by Customer
    A:
    Reattach the side door trim panel to complete the process.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after securing the weatherstrip for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the front door stepwell mat, followed by the lower and upper pillar garnish moldings, and finally, the hinge pillar trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new left side rear door upper weatherstrip for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Position the new weatherstrip onto the door and firmly press the retainers into the holes to secure it in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door weatherstrip for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Begin by removing the rear corner garnish molding, the driver side body side rear trim panel, the passenger side rear corner trim panel, the rear floor trim plate, and the rear door opening frame garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the retainers for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Install the new weatherstrip onto the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door weatherstrip for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Begin by removing the rear corner garnish molding, the driver side body side rear trim panel, the passenger side rear corner trim panel, the rear floor trim plate, and the rear door opening frame garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after installing the new weatherstrip for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the hinged body side window and finally, put back the sliding side door upper trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the rear hood seal for the 2010 GMC Savana 2500? Posted by Customer
    A:
    First, pull up on the rear hood seal and remove it from the cowl pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the butt joint seam be installed for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Install the butt joint seam at the center of the bottom pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How do you remove the door opening weatherstrip for the 2005 GMC Savana 3500? Posted by Customer
    A:
    Gently pull it from the door opening pinch-weld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you prepare the new weatherstrip for installation for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Apply a mild soap and water solution to the new weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the installation process for the weatherstrip for the 2011 GMC Savana 2500? Posted by Customer
    A:
    Position the weatherstrip onto the door and press the retainers in the weatherstrip into the holes in the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the butt joint seam be installed for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Install the butt joint seam at the center of the bottom pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Seal
    Q:
    How do you prepare the new weatherstrip for installation for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Apply weatherstrip adhesive into the channel on the new side door opening weatherstrip using GM P/N 12345097 (Canadian P/N 10953479) or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2011 GMC Savana 3500? Posted by Customer
    A:
    Install the new weatherstrip onto the sliding side door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Apply a mild soap and water solution to the new weatherstrip, then start at the bottom of the channel and slide it up to the top of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Position the weatherstrip onto the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the upper trim panel for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Take out the hinged body side window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Weatherstrip, Driver Side 15126641 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15126641 Weatherstrip, Driver Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15126641 Weatherstrip, Driver Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 15126641 maintains top performance when functioning as the Weatherstrip, Door Weatherstrip; Door Seal unit at its Driver Side. The component 15126641 is constructed from durable material and its dimensions span 18.3 x 17.8 x 3.1 inches while weighing 3.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Side Door Opening. The part 15126641 has available replacement options 25754301. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.