Make sure this part fits

GM 25956729
Run Weatherstrip, Front Passenger Side

2004-2012 GM

Customer Questions & Expert Answers (18)
GM 25956729 Run Weatherstrip, Front Passenger Side
GM 25956729 Run Weatherstrip, Front Passenger Side
  • Part Description
    Weatherstrip-Front Side Door Window; Window Channel
  • Position
    Front Passenger Side
  • Replaces
    10366275, 15134509
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25956729 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25956729 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the old sealing strip for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Position the new sealing strip to the rear door pinchweld flange and press it down into place until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door opening weatherstrip for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Open the rear door and remove the lower center pillar trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the lower window channel weatherstrip be inserted for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Insert it between the door inner and outer panels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the weatherstrip from around the door for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Insert the J 38778 under the weatherstrip and release the integral pins from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the old rear door outer auxiliary weatherstrip for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Pull it from the rear door pinchweld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front side door window weatherstrip for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you ensure the new weatherstrip is properly installed for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Make sure the integral retainers are properly secured.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the process for installing the lower molded detail for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Install it using another integral retaining pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear side access door auxiliary weatherstrip for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Open the front and side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the lower center pillar panel for the 2009 GMC Canyon? Posted by Customer
    A:
    Take out the front door opening weatherstrip from the door opening pinchweld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after installing the new weatherstrip for the 2007 GMC Canyon? Posted by Customer
    A:
    Close the front and side doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after installing the new auxiliary weatherstrip for the 2004 GMC Canyon? Posted by Customer
    A:
    Close the front and rear doors as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the lower window channel weatherstrip be inserted during installation for the 2005 GMC Canyon? Posted by Customer
    A:
    Insert it between the door inner and outer panels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you release the weatherstrip from the door frame for the 2008 GMC Canyon? Posted by Customer
    A:
    Insert the tool under the weatherstrip and release the integral retainers from the door frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the weatherstrip on the rear side access door for the 2010 GMC Canyon? Posted by Customer
    A:
    Gather the necessary tool, Door Trim Pad Clip Remover (J 38778).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the weatherstrip on the rear side access door for the 2009 GMC Canyon? Posted by Customer
    A:
    Gather the necessary tool, Door Trim Pad Clip Remover (J 38778).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old sealing strip for the 2006 GMC Canyon? Posted by Customer
    A:
    Position the new rear door outer belt sealing strip to the rear door pinchweld flange and press it down into place until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Run Weatherstrip, Front Passenger Side 25956729 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25956729 Run Weatherstrip, Front Passenger Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25956729 Run Weatherstrip, Front Passenger Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 25956729 maintains top performance when functioning as the Weatherstrip-Front Side Door Window; Window Channel unit at its Front Passenger Side. The component 25956729 is constructed from durable material and its dimensions span 3.0 x 18.5 x 18.0 inches while weighing 2.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Side Door Window Glass. The part 25956729 has available replacement options 10366275, 15134509. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.