Make sure this part fits

GM 25775560
Rear Weatherstrip

2002-2009 GM

Customer Questions & Expert Answers (23)
GM 25775560 Rear Weatherstrip
GM 25775560 Rear Weatherstrip
  • Part Description
    Weatherstrip, Door Sill And Rocker
  • Replaces
    15052243
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25775560
    Part DescriptionWeatherstrip, Door Sill And Rocker
    Item Dimensions21.4 x 3.7 x 1.0 inches
    Item Weight0.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15052243
    Require Quantity2
    ManufacturerGeneral Motors
    SKU25775560
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25775560 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25775560 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you align the new weatherstrip for the 2004 Buick Rainier? Posted by Customer
    A:
    Align the paint dots on the weatherstrip with the sheet metal joints of the window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after opening the end gate and moveable roof for the 2004 Buick Rainier? Posted by Customer
    A:
    Remove the push-pins that secure the end gate weatherstrip upper mold from the moveable roof module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door window glass weatherstrip for the 2006 Buick Rainier? Posted by Customer
    A:
    Remove the screw that retains the sealing strip to the door using a screwdriver.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sunroof window weatherstrip for the 2007 Buick Rainier? Posted by Customer
    A:
    First, remove the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you secure the weatherstrip to the lower pinch-weld flange for the 2005 Buick Rainier? Posted by Customer
    A:
    Press the weatherstrip onto the lower pinch-weld flange, working around the lower midgate opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2006 GMC Envoy? Posted by Customer
    A:
    Finally, close the liftgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you start replacing the liftgate weatherstrip for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    First, open the liftgate and pull the weatherstrip from the liftgate opening pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be positioned during installation for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Begin at the top center of the liftgate window opening, positioning the weatherstrip to the pinch-weld flange and working down both sides towards the bottom center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after opening the doors for the 2008 GMC Envoy? Posted by Customer
    A:
    Remove the push pin retainers from the front door sealing weatherstrip at the base of the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you take out the weatherstrip from around the door for the 2004 GMC Envoy? Posted by Customer
    A:
    Insert the Door Trim Pad Clip Remover (J 38778) under the weatherstrip and release the integral pins from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sunroof window weatherstrip for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    First, remove the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the bond joint be positioned during installation for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    The bond joint should be at the lower center of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear hood weatherstrip seal for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Open the hood and remove the rear hood seal from the inlet grille panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear hood weatherstrip seal for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Open the hood and remove the rear hood seal from the air inlet grille panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the front door sill plate for the 2007 GMC Envoy? Posted by Customer
    A:
    Take off the weatherstrip from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What do you do after pulling back the weatherstrip for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    Expose the weatherstrip side retainer screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after aligning the weatherstrip for the 2004 GMC Envoy? Posted by Customer
    A:
    Firmly seat the weatherstrip into the front door window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What do you do after removing the push pin retainers for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Pull back the weatherstrip to expose the weatherstrip side retainer screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the weatherstrip side retainer for the 2003 GMC Envoy? Posted by Customer
    A:
    Attach the weatherstrip side retainer back to the windshield pillar and secure it with the screws, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new liftgate weatherstrip for the 2009 GMC Envoy? Posted by Customer
    A:
    Start at the top center of the liftgate opening, position it to the pinch-weld flange, and work down both the right and left sides towards the bottom center, ensuring not to stretch the weatherstrip during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the screw for the 2002 GMC Envoy? Posted by Customer
    A:
    Lift upward on the forward edge of the sealing strip and remove it from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after detaching the lower molds for the 2005 GMC Envoy? Posted by Customer
    A:
    Detach the weatherstrip from the endgate opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25775560, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25775560 Rear Weatherstrip. It is sometimes referred to as GM Weather Strip. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25775560 Rear Weatherstrip. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery