How to replace the brake caliper bracket on 2000 Buick LeSabre?

To replace for the Brake Caliper Bracket it is necessary to follow the line of disassembling where you take out the caliper and brake pads from the caliper anchor bracket. Secondly, take off the bolts of caliper anchor bracket and the bracket itself. When installing, also make a few drops of gm loctite tm or the like on the threads of the caliper anchor bracket bolts or new pre-coated bolts. The caliper anchor bracket is installed to the Steering Knuckle (front) or to the lower Control Arm (rear), strictly complying with the fastener notice in service precautions. Fit the caliper anchor bracket bolts tightening the front bolts to 185 nm (137ft. Lbs) and rear bolts to 124 nm (94ft. Lbs). Finally, install the brake caliper.

OEM 2000 Buick LeSabre Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Caliper Bracket found

View related parts
2000 Buick LeSabre Caliper Bracket Part Number: 18029817
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Mount; Caliper Adapter; Carrier
- Position: Rear
- Replaces: 18017427
- Item Weight: 2.50 Pounds
- Item Dimensions: 7.2 x 4.5 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 18029817
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2000 Buick LeSabre Brake Caliper Bracket

With a comprehensive array of OEM 2000 Buick LeSabre Brake Caliper Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick LeSabre Brake Caliper Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick LeSabre Brake Caliper Bracket Parts and Q&A

Q: How to replace the brake caliper bracket on 2000 Buick LeSabre?
A: To replace for the Brake Caliper Bracket it is necessary to follow the line of disassembling where you take out the caliper and brake pads from the caliper anchor bracket. Secondly, take off the bolts of caliper anchor bracket and the bracket itself. When installing, also make a few drops of gm loctite tm or the like on the threads of the caliper anchor bracket bolts or new pre-coated bolts. The caliper anchor bracket is installed to the Steering Knuckle (front) or to the lower Control Arm (rear), strictly complying with the fastener notice in service precautions. Fit the caliper anchor bracket bolts tightening the front bolts to 185 nm (137ft. Lbs) and rear bolts to 124 nm (94ft. Lbs). Finally, install the brake caliper.