OEM 2000 Buick LeSabre Camshaft Position Sensor

2000 Buick LeSabre Parts Questions & Experts Answers

• Q: How to service the camshaft position sensor on 2000 Buick LeSabre?

  A: Starting your service of the Camshaft Position Sensor requires turning off the Ignition Switch. You should use a hoist to lift the vehicle yet follow all necessary vehicle lifting precautions before the operation. The suspension system requires removal of the right front wheel with its attached tire followed by removal of the splash shield from the right inner fender. Users should disconnect the electrical connector from the Camshaft Position Sensor as well as remove the cmp sensor bolt before extracting the cmp sensor from the engine front cover. To install the cmp sensor, put it in position on the engine front cover then fasten its retaining bolt with a torque of 10 nm (88 lb in). Attach the electrical connector to the cmp sensor after placing back the right inner fender splash shield and finally install the right front wheel together with its tire.