How to service and repair the control arm bushing on 2000 Chevrolet Camaro?

The Control Arm Bushing service and repair operation begins with vehicle elevation and secure support before installing an adjustable jack stand to support the rear axle. First remove the lower Control Arm before installing the bushing receiver (J21474-5) over the flanged side of the bushing. Place the large outside diameter of the bushing remover (J21474-23) against the outside diameter of the outer sleeve using an arbor press to extract the bushing from the lower Control Arm. When installing a bushing use the bushing receiver (J21474-5) to cover the flanged bushing side while using the front and rear bushing installer (J21474-20) to properly position the bushing. Install the lower Control Arm then detach the rear axle support and lower the entire vehicle.

OEM 2000 Chevrolet Camaro Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arm Bushings found

View related parts
2000 Chevrolet Camaro Lower Control Arm Rear Bushing
Part Number: 22156434
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings
- Position: Lower
- Item Weight: 0.90 Pounds
- Item Dimensions: 2.6 x 2.6 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22156434
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Camaro Lower Control Arm Front Bushing
Part Number: 22145392
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Bushings
- Position: Lower
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.3 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22145392
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2000 Chevrolet Camaro Control Arm Bushing

With a comprehensive array of OEM 2000 Chevrolet Camaro Control Arm Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Camaro Control Arm Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Camaro Parts Questions & Experts Answers

Q: How to service and repair the control arm bushing on 2000 Chevrolet Camaro?
A: The Control Arm Bushing service and repair operation begins with vehicle elevation and secure support before installing an adjustable jack stand to support the rear axle. First remove the lower Control Arm before installing the bushing receiver (J21474-5) over the flanged side of the bushing. Place the large outside diameter of the bushing remover (J21474-23) against the outside diameter of the outer sleeve using an arbor press to extract the bushing from the lower Control Arm. When installing a bushing use the bushing receiver (J21474-5) to cover the flanged bushing side while using the front and rear bushing installer (J21474-20) to properly position the bushing. Install the lower Control Arm then detach the rear axle support and lower the entire vehicle.