How to replace the defroster Blend Door Actuator on 2000 Chevrolet Impala?

In order to replace the defroster actuator, you will need to remove the cross vehicle beam and detached the vacuum lines that connect with the defroster vacuum actuator. Rotate the defroster valve lever fully to the rearward (counterclockwise) direction and pry up the defrost valve lever leverage (with great care) using a screwdriver between the face at the bottom of the defrost valve lever and the wall of the hvac module case below the valve lever to retain it in its position. Lift to release the defroster vacuum actuator retaining tab; then very gently rotate the defroster vacuum actuator upward and forward to release it from the HVAC module case. Remove the vacuum actuator pushrod from the defrost lever and take the vacuum actuator away. For installation, attach the vacuum actuator pushrod to the defrost valve lever, and work through it rearward and down to slot the actuator slots with the HVAC module case and push the vacuum actuator into the HVAC module to set the retaining tab. Lastly, hook up the vacuum lines on the defroster vacuum actuator and install the cross vehicle beam back.

OEM 2000 Chevrolet Impala Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Blend Door Actuators found

View related parts
2000 Chevrolet Impala Door Actuator Part Number: 89018365
$173.26 MSRP: $356.04
You Save: $182.78 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Temperature Door Actuator; Switch; Controller; Actuator; Actuator, A/C Vacuum Control; Actuator, A/C Control
- Replaces: 16163982
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89018365
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Controller Part Number: 89018681
$57.71 MSRP: $118.58
You Save: $60.87 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Vacuum Control; HVAC Heater Blend Door Actuator; Actuator; Actuator, A/C Vacuum Control; Actuator, A/C Control
- Replaces: 16177412, 89018395
- Item Weight: 1.30 Pounds
- Item Dimensions: 10.2 x 7.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89018681
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Door Actuator Part Number: 52487750
Product Specifications
- Other Name: Actuator Assembly, Mode Valve; HVAC Heater Blend Door Actuator; Controller; Actuator; Actuator, A/C Control
- Replaces: 52482059
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.7 x 5.5 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52487750
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Actuator Part Number: 52487607
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Actuator, A/C Control
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.0 x 4.9 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52487607
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Door Actuator Part Number: 52487593
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Controller; Actuator; Actuator, A/C Control
- Replaces: 52472510
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.3 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52487593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2000 Chevrolet Impala Blend Door Actuator

With a comprehensive array of OEM 2000 Chevrolet Impala Blend Door Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Impala Blend Door Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Impala Blend Door Actuator Parts and Q&A

Q: How to replace the defroster Blend Door Actuator on 2000 Chevrolet Impala?
A: In order to replace the defroster actuator, you will need to remove the cross vehicle beam and detached the vacuum lines that connect with the defroster vacuum actuator. Rotate the defroster valve lever fully to the rearward (counterclockwise) direction and pry up the defrost valve lever leverage (with great care) using a screwdriver between the face at the bottom of the defrost valve lever and the wall of the hvac module case below the valve lever to retain it in its position. Lift to release the defroster vacuum actuator retaining tab; then very gently rotate the defroster vacuum actuator upward and forward to release it from the HVAC module case. Remove the vacuum actuator pushrod from the defrost lever and take the vacuum actuator away. For installation, attach the vacuum actuator pushrod to the defrost valve lever, and work through it rearward and down to slot the actuator slots with the HVAC module case and push the vacuum actuator into the HVAC module to set the retaining tab. Lastly, hook up the vacuum lines on the defroster vacuum actuator and install the cross vehicle beam back.