How to service the LH Blend Door Actuator on Chevrolet Impala?

The first step to servicing the left air temperature actuator is to take off the left IP insulator and the knee bolster bracket. Take the electrical connector off the left air temperature actuator, and afterwards, remove the mounting screws and take the actuator out. For installation, set the left air temperature actuator so the slots on the driver mate with the flats on the shaft and the hole lines up with the pin on the HVAC module case. Push the actuator onto the shaft so that the actuator driver sits in place and the holes are even with the screws on the HVAC module case. Once the screws are inserted and tightened to 1.5 N.m (13 lb in), connect the electrical connector to the actuator. Then, put back the knee bolster bracket and the left IP insulator.

How to replace the LH Blend Door Actuator on Chevrolet Impala?

To remove the left air temperature actuator, the following steps will be completed; first, the left instrument panel (I/P) insulator and the knee bolster bracket are removed. Before removing the actuator it is essential to disconnect the electrical connector from the left air temperature actuator and remove the mounting screws. For installation locate the new left air temperature actuator and slot the flats on the shaft into the slots in the electric actuator driver and tap the locating hole to align with the alignment pin of the HVAC module case. Raise the actuator and slide it onto the shaft then the actuator driver should seat entirely then the mounting holes would be flush against the mounting screws on the HVAC module case. Mount the screws and tighten to 1.5 N.m (13 lb in) and reconnect the electrical connector. The neck bolster bracket and the left I/P insulator should be reinstalled, and then, the actuator needs to be calibrated.

OEM Chevrolet Impala Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Blend Door Actuators found

View related parts
Chevrolet Impala Door Actuator Part Number: 89018365
$173.26 MSRP: $356.04
You Save: $182.78 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Temperature Door Actuator; Switch; Controller; Actuator; Actuator, A/C Vacuum Control; Actuator, A/C Control
- Replaces: 16163982
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Controller Part Number: 89018681
$57.71 MSRP: $118.58
You Save: $60.87 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Vacuum Control; HVAC Heater Blend Door Actuator; Actuator; Actuator, A/C Vacuum Control; Actuator, A/C Control
- Replaces: 16177412, 89018395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Impala | Base, LS, LS Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Actuator Part Number: 22754988
$41.88 MSRP: $86.08
You Save: $44.20 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator, A/C Control
- Replaces: 10356910, 15142056, 10325404, 15249473, 15844096
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Actuator Part Number: 22743933
$36.98 MSRP: $69.45
You Save: $32.47 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator, A/C Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Actuator Part Number: 22743920
$44.20 MSRP: $83.01
You Save: $38.81 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator, A/C Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Actuator Part Number: 22754989
$50.36 MSRP: $94.57
You Save: $44.21 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator, A/C Control
- Replaces: 10325407, 10349563, 15844095
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Door Actuator Part Number: 52487750
Product Specifications
- Other Name: Actuator Assembly, Mode Valve; HVAC Heater Blend Door Actuator; Controller; Actuator; Actuator, A/C Control
- Replaces: 52482059
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Actuator Part Number: 52487607
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Actuator, A/C Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Impala | Base, LS, LS Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Door Actuator Part Number: 52487593
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Controller; Actuator; Actuator, A/C Control
- Replaces: 52472510
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Impala Blend Door Actuator

Want to cut long-term maintenance and repair costs? Choose OEM Blend Door Actuator. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Blend Door Actuator includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Impala Blend Door Actuator Parts and Q&A

Controller
89018681
Q: How to service the LH Blend Door Actuator on Chevrolet Impala?
A:
The first step to servicing the left air temperature actuator is to take off the left IP insulator and the knee bolster bracket. Take the electrical connector off the left air temperature actuator, and afterwards, remove the mounting screws and take the actuator out. For installation, set the left air temperature actuator so the slots on the driver mate with the flats on the shaft and the hole lines up with the pin on the HVAC module case. Push the actuator onto the shaft so that the actuator driver sits in place and the holes are even with the screws on the HVAC module case. Once the screws are inserted and tightened to 1.5 N.m (13 lb in), connect the electrical connector to the actuator. Then, put back the knee bolster bracket and the left IP insulator.
Actuator
22754988
Q: How to replace the LH Blend Door Actuator on Chevrolet Impala?
A:
To remove the left air temperature actuator, the following steps will be completed; first, the left instrument panel (I/P) insulator and the knee bolster bracket are removed. Before removing the actuator it is essential to disconnect the electrical connector from the left air temperature actuator and remove the mounting screws. For installation locate the new left air temperature actuator and slot the flats on the shaft into the slots in the electric actuator driver and tap the locating hole to align with the alignment pin of the HVAC module case. Raise the actuator and slide it onto the shaft then the actuator driver should seat entirely then the mounting holes would be flush against the mounting screws on the HVAC module case. Mount the screws and tighten to 1.5 N.m (13 lb in) and reconnect the electrical connector. The neck bolster bracket and the left I/P insulator should be reinstalled, and then, the actuator needs to be calibrated.