Make sure this part fits

GM 22754989
Actuator

2004-2016 GM

Customer Questions & Expert Answers (26)
GM 22754989 Actuator
  • Part Description
    Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator
  • Replaces
    10325407, 10349563, 15844095
  • Manufacturer
    General Motors
Make sure this part fits
$50.36 MSRP: $94.57
You Save: $44.21 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2013 Chevrolet Corvette427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    2004-2013 Chevrolet Impala50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    2004-2008 Chevrolet MalibuBase, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2004-2007 Chevrolet Monte CarloLS, LT, LTZ, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2004-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP, GXP6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22754989 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22754989 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the final steps after securing the actuator for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Reinstall the I/P compartment and the right side I/P insulator, and calibrate the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to replace the left air temperature actuator for the 2006 Buick LaCrosse? Posted by Customer
    A:
    First, remove the left closeout panel and disconnect the electrical connector from the left air temperature actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after sliding the actuator driver onto the shaft for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Make sure it sits completely and the mounting holes are flush with the HVAC module case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What are the final steps after reconnecting the electrical connector for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Reinstall the I/P compartment and the right side I/P insulator, then calibrate the actuator as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you secure the air temperature actuator for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Install the screws to the air temperature actuator, tightening them to 1.5 N.m (13 lb in), and reconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you secure the air temperature actuator for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Install the screws to secure the air temperature actuator, tightening them to 1.5 N.m (13 lb in), and reconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after installing the actuator for the 2008 Cadillac XLR? Posted by Customer
    A:
    Connect the actuator electrical connector and reinstall the I/P assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the SIR bracket for the 2008 Cadillac XLR? Posted by Customer
    A:
    Disconnect the RH air temperature actuator electrical connector and remove the mounting screws before taking out the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step after reinstalling the SIR bracket for the 2005 Cadillac XLR? Posted by Customer
    A:
    Recalibrate the actuators as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after disconnecting the electrical connector for the 2007 Cadillac XLR? Posted by Customer
    A:
    Next, remove the actuator mounting screws and take out the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after securing the actuator for the 2007 Cadillac XLR? Posted by Customer
    A:
    Reconnect the RH air temperature actuator electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you install the new RH air temperature actuator for the 2009 Cadillac XLR? Posted by Customer
    A:
    Position the new RH air temperature actuator and secure it with the mounting screws, tightening them to 1.6 Nm (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the I/P cluster assembly for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Disconnect the electrical connector from the left air temperature actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step after reinstalling the I/P cluster assembly for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Recalibrate the actuators as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you install the new left air temperature actuator for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Position the left air temperature actuator and secure it with the actuator mounting screws, tightening them to 1.6 N.m (14 lb in) as per Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How should the recirculation actuator be installed for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Install the actuator and secure it with the mounting screws, tightening them to 1.6 Nm (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step in the installation process for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Position the right air temperature actuator and align the slots in the electric actuator driver to the flats on the shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to replace the Air Temperature Actuator for the 2007 Chevrolet Malibu? Posted by Customer
    A:
    Remove the fuse labeled HVAC CTRL (BATT).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you ensure the actuator is properly seated for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Slide the actuator onto the shaft until the actuator driver seats completely and the mounting holes are flush with the mounting screws on the HVAC module case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after reconnecting the wire harness for the 2005 Chevrolet Malibu? Posted by Customer
    A:
    Install the air temperature actuator and tighten the screws to 1.5 N.m (13 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the actuator for the 2004 Chevrolet Malibu? Posted by Customer
    A:
    Disconnect the wire harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after securing the actuator for the 2006 Chevrolet Malibu? Posted by Customer
    A:
    Reinstall the knee bolster, the left closeout panel, and finally, the fuse labeled HVAC CTRL (BATT).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What are the final steps after reconnecting the electrical connector for the 2005 Chevrolet Impala? Posted by Customer
    A:
    Reinstall the knee bolster bracket and the left I/P insulator, then calibrate the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after the actuator is seated for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the mounting screws, tightening them to 1.5 N.m (13 lb in), then reconnect the electrical connector to the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the SIR bracket for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Disconnect the RH air temperature actuator electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Actuator 22754989 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22754989 Actuator is available in the market under the name GM Blend Door Actuator. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22754989 Actuator fits certain Chevrolet Malibu, Impala, Corvette models, as well as Cadillac XLR. Additionally, it is compatible with Buick LaCrosse and Pontiac Grand Prix models.
The original GM component designated by manufacturer part number 22754989 maintains top performance when functioning as the Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator unit. The component 22754989 is constructed from durable material and its dimensions span 4.3 x 4.1 x 2.1 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Actuator, A/C Control. The part 22754989 has available replacement options 10325407, 10349563, 15844095. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.