How to replace the door striker anchor plate on 2000 Chevrolet Impala?

Starting the door striker anchor plate replacement requires you to remove the front or rear door lock pillar trim and then remove the center pillar upper (Front Striker) and lower (Front Striker) trim panels. The next procedure involves removing the quarter lower trim panel which is labeled (Rear Striker). First mark the striker position with a grease pencil and afterwards remove the striker screws from the front door lock as well as the door lock striker and accompanying shims followed by the anchor plate. The first step for installation includes placing the anchor plate then applying the door lock shims and striker before screwing in the striker screws. Tighten the screws that attach the door lock striker to your marked position at 25 Nm (18 lb ft). You should modify the door lock striker when needed. To finish the repair process install the front or rear trim by putting on the center pillar upper trim panel (Front Striker) and the center pillar lower trim panel (Front Striker) and the quarter lower trim panel (Rear Striker).

OEM 2000 Chevrolet Impala Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Strikers found

View related parts
2000 Chevrolet Impala Striker, Rear Part Number: 10442728
$21.35 MSRP: $31.76
You Save: $10.41 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker Assembly-Rear Compartment Lid Latch
- Position: Rear
- Replaces: 10295278, 10442729
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.9 x 5.5 x 2.8 inches
- Condition: New
- SKU: 10442728
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Striker, Black Part Number: 16629888
Product Specifications
- Other Name: Striker, Door Lock Striker
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.4 x 2.6 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16629888
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Striker Part Number: 10425371
Product Specifications
- Other Name: Striker, Instrument Panel Compartment Door Lock And Console Compartment Door Lock
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.6 x 3.0 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10425371
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2000 Chevrolet Impala Door Striker

With a comprehensive array of OEM 2000 Chevrolet Impala Door Striker, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Impala Door Striker are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Impala Door Striker Parts and Q&A

Q: How to replace the door striker anchor plate on 2000 Chevrolet Impala?
A: Starting the door striker anchor plate replacement requires you to remove the front or rear door lock pillar trim and then remove the center pillar upper (Front Striker) and lower (Front Striker) trim panels. The next procedure involves removing the quarter lower trim panel which is labeled (Rear Striker). First mark the striker position with a grease pencil and afterwards remove the striker screws from the front door lock as well as the door lock striker and accompanying shims followed by the anchor plate. The first step for installation includes placing the anchor plate then applying the door lock shims and striker before screwing in the striker screws. Tighten the screws that attach the door lock striker to your marked position at 25 Nm (18 lb ft). You should modify the door lock striker when needed. To finish the repair process install the front or rear trim by putting on the center pillar upper trim panel (Front Striker) and the center pillar lower trim panel (Front Striker) and the quarter lower trim panel (Rear Striker).