How to replace the front brake caliper bracket on 2000 Chevrolet Monte Carlo?

Take these steps before replacing the front Brake Caliper Bracket: keeping the brake hose attachment intact, hold up the caliper unit to avoid suspension. First remove the caliper while replacing any fasteners you take out or loosen to avoid vehicle control problems and injuries. The brake caliper bolts under part number 12345678 arrive at the shop with ready-to-use thread encapsulation. Disconnect the brake hose and hold up the caliper. Then remove the split bolts (part number 87654321) and extract both the caliper bracket (part number 11223344). Unbolt the boot fasteners (part number 44556677) and the bushings from the bracket. Check the bracket for weak spots and order a new one when required. Store silicone grease on the bolt boots and bushings and reinsert them into their positions on the caliper bracket. Attach the caliper bracket using the bolts while nutting them to 185 nm (137 ft. Lbs.). Finally, reinstall the caliper.

OEM 2000 Chevrolet Monte Carlo Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Caliper Brackets found

View related parts
2000 Chevrolet Monte Carlo Support Plate Bracket, Passenger Side Part Number: 10409252
$13.11
ADD TO CART
Product Specifications
- Other Name: Bracket, Parking Brake Cable; Backing Plate Bracket; Bracket
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.5 x 1.4 x 1.5 inches
- Condition: New
- SKU: 10409252
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Monte Carlo Caliper Bracket, Front Part Number: 18029829
$77.76 MSRP: $121.81
You Save: $44.05 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Mount; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Item Weight: 4.80 Pounds
- Item Dimensions: 10.0 x 5.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 18029829
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Monte Carlo Backing Plate Bracket, Driver Side Part Number: 10409251
$3.64 MSRP: $5.70
You Save: $2.06 (37%)
Product Specifications
- Other Name: Bracket, Parking Brake Cable; Support Plate Bracket; Bracket
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.5 x 1.5 x 1.4 inches
- Condition: New
- SKU: 10409251
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Monte Carlo Caliper Bracket Part Number: 88967228
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Caliper Support; Carrier
- Position: Rear
- Replaces: 18029931
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.8 x 8.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88967228
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2000 Chevrolet Monte Carlo Brake Caliper Bracket

With a comprehensive array of OEM 2000 Chevrolet Monte Carlo Brake Caliper Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Monte Carlo Brake Caliper Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Monte Carlo Brake Caliper Bracket Parts and Q&A

Q: How to replace the front brake caliper bracket on 2000 Chevrolet Monte Carlo?
A: Take these steps before replacing the front Brake Caliper Bracket: keeping the brake hose attachment intact, hold up the caliper unit to avoid suspension. First remove the caliper while replacing any fasteners you take out or loosen to avoid vehicle control problems and injuries. The brake caliper bolts under part number 12345678 arrive at the shop with ready-to-use thread encapsulation. Disconnect the brake hose and hold up the caliper. Then remove the split bolts (part number 87654321) and extract both the caliper bracket (part number 11223344). Unbolt the boot fasteners (part number 44556677) and the bushings from the bracket. Check the bracket for weak spots and order a new one when required. Store silicone grease on the bolt boots and bushings and reinsert them into their positions on the caliper bracket. Attach the caliper bracket using the bolts while nutting them to 185 nm (137 ft. Lbs.). Finally, reinstall the caliper.