How to replace the front brake caliper bracket on Chevrolet Monte Carlo?

Before handling the separate brake caliper, support it with heavy mechanic's wire or similar tool to safeguard the brake hose's integrity since improper handling of the hose may lead to leakage. Take away the front brake caliper while leaving the hydraulic brake hose connected before removing both the brake pads and caliper itself. You should remove both caliper bracket bolts along with the caliper bracket from the assembly. Check if the caliper bracket bolts and knuckle have clean threads and ready for loading before assembly. Threadlocker gm p/n 12345493 (Canada 10953488) goes onto caliper bracket bolt threads before you put the bracket into position and tighten bolt connections to 180 nm (133 ft. Lbs.). Put back the front brake pads and the caliper into position now.

How to replace the rear brake caliper bracket on Chevrolet Monte Carlo?

Before switching the brake caliper bracket start with two steps. First maintain the brake hose connection to the caliper unit and suspend the caliper through a support to prevent depending it on the hose only. Take out the caliper first and put back all fasteners properly as faulty installation leads to vehicle loss control and safety risks. The new brake caliper bolts arrive with built-in thread lubricant. Take off the caliper bracket by removing its two bolts. Check the bracket for damage when disconnecting bolt boots and bushings. Replace the bracket if it shows cracks during inspection. Apply silicone grease to bolt boots and bushings before putting them back into their places on the caliper bracket. Firmly mount the caliper bracket with bolts at 125 Nm pressure before placing back the caliper.

OEM Chevrolet Monte Carlo Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Caliper Brackets found

View related parts
Chevrolet Monte Carlo Caliper Support, Front Part Number: 18060197
$60.59 MSRP: $82.95
You Save: $22.36 (27%)
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Mount Bracket
- Position: Front
- Replaces: 18022078
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2001 Chevrolet Monte Carlo | LS, Z34 | 3.1L V6, 3.4L V6, 3.8L V6, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Support Plate Bracket, Passenger Side Part Number: 10409252
$13.11
ADD TO CART
Product Specifications
- Other Name: Bracket, Parking Brake Cable; Backing Plate Bracket; Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Caliper Bracket, Front Part Number: 18029829
$77.76 MSRP: $121.81
You Save: $44.05 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Mount; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Backing Plate Bracket, Driver Side Part Number: 10409251
$3.64 MSRP: $5.70
You Save: $2.06 (37%)
Product Specifications
- Other Name: Bracket, Parking Brake Cable; Support Plate Bracket; Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Caliper Bracket Part Number: 88967228
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Caliper Support; Carrier
- Position: Rear
- Replaces: 18029931
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Caliper Support, Front Part Number: 25983743
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 15251790
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Caliper Bracket Part Number: 18029822
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
- Replaces: 18020633
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo Brake Caliper Bracket

Want to cut long-term maintenance and repair costs? Choose OEM Brake Caliper Bracket. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Brake Caliper Bracket includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Monte Carlo Brake Caliper Bracket is one of the crucial parts of the Chevrolet Monte Carlo, which somehow details the efficiency and effectiveness of the Chev This Brake Caliper Bracket effectively and safely positions brake pads to apply same force on brake rotors since it has the specific responsibility of holding brake pads in place. Over the years, different generations of the Chevrolet Monte Carlo production have been associated with changes in the Brake Caliper Bracket design to increase the efficiency of the braking system as well as a structure that supports several vital brake components. This is characteristic of Chevrolet models, which so aligned with the Monte Carlo model thus giving a lasting testament of the car. Designed to fit numerous Monte Carlo models, from the ones that come with V6 and V8 engines, to the Brake Caliper Bracket can be considered an essential component of the car, and it directly impacts the overall driving experience, allowing the drivers to count on their vehicle at the moments when it is needed the most. Importantly, it has to be noted that Chevrolet Monte Carlo Brake Caliper Bracket is targeted to the automotive market that has high requirements and expectations regarding the part in question owing to the characteristics of the object, the requirements engineered into the production process, and the overall vehicle performance. Due to the quality, output power, and protection, the Brake Caliper Bracket is an essential component in the Chevrolet Monte Carlo automobiles; thus, accentuating the legacy of this Coupe car that has fascinated enthusiasts for many years.

Chevrolet Monte Carlo Brake Caliper Bracket Parts and Q&A

Caliper Bracket
88967228
Q: How to replace the front brake caliper bracket on Chevrolet Monte Carlo?
A:
Before handling the separate brake caliper, support it with heavy mechanic's wire or similar tool to safeguard the brake hose's integrity since improper handling of the hose may lead to leakage. Take away the front brake caliper while leaving the hydraulic brake hose connected before removing both the Brake Pads and caliper itself. You should remove both caliper bracket bolts along with the caliper bracket from the assembly. Check if the caliper bracket bolts and knuckle have clean threads and ready for loading before assembly. Threadlocker gm p/n 12345493 (Canada 10953488) goes onto caliper bracket bolt threads before you put the bracket into position and tighten bolt connections to 180 nm (133 ft. Lbs.). Put back the front brake pads and the caliper into position now.
Backing Plate Bracket, Driver Side
10409251
Q: How to replace the rear brake caliper bracket on Chevrolet Monte Carlo?
A:
Before switching the brake caliper bracket start with two steps. First maintain the brake hose connection to the caliper unit and suspend the caliper through a support to prevent depending it on the hose only. Take out the caliper first and put back all fasteners properly as faulty installation leads to vehicle loss control and safety risks. The new brake caliper bolts arrive with built-in thread lubricant. Take off the caliper bracket by removing its two bolts. Check the bracket for damage when disconnecting bolt boots and bushings. Replace the bracket if it shows cracks during inspection. Apply silicone grease to bolt boots and bushings before putting them back into their places on the caliper bracket. Firmly mount the caliper bracket with bolts at 125 Nm pressure before placing back the caliper.