How to replace the rear disc brake backing plate on Chevrolet Monte Carlo?

You must lift the vehicle before starting work to access the disc Brake Backing Plate for replacement. To begin work on the brake system release the park brake pressure at the equalizer before removing the bracket and rotor at the rear. Unclip and take out the rear park brake cable from its bracket on the wheel. Also disconnect the park brake cable return spring from the park brake actuator and wheel bracket. The technician should take out all parts of the rear hub including the hub itself plus backing plate and park brake components as an assembly. The two retainers must come off along with the park brake cable bracket to release the park brake actuator. Place the entire rear hub assembly to the side afterward. Take out the Parking Brake Shoe and actuator unit from the back plate. First put the park brake actuator and shoe on the backing plate before you set the complete assembly over the hub. To complete the installation secure the two retainers and the park brake cable bracket first then fit the rear hub. Reattach the rear park brake cable to its bracket at the wheel base and snap the park brake cable return spring onto its positions at both the wheel base and park brake actuator. First put on the rear rotor then install the rear caliper bracket and lastly put on the rear wheels and tires at their appropriate positions. Set the park brake to its correct position at the equalizer before putting down the vehicle.

OEM Chevrolet Monte Carlo Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Backing Plates found

View related parts
Chevrolet Monte Carlo Splash Shield, Passenger Side Part Number: 459758
$43.27
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Front Brake Disc Splash Right-Hand; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Backing Plate, Front Driver Side Part Number: 25816682
$61.38 MSRP: $119.13
You Save: $57.75 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaces: 88965639, 88967265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Backing Plate, Front Passenger Side Part Number: 25816681
$61.38 MSRP: $119.14
You Save: $57.76 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Replaces: 88965640, 88967266
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Splash Shield, Driver Side Part Number: 459757
Product Specifications
- Other Name: Shield Assembly-Front Brake Disc Splash Left-Hand; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Backing Plate, Driver Side Part Number: 25990085
Product Specifications
- Other Name: Shield-Parking Brake Actuator Splash; Brake Dust Shield; Support Plate; Shield, Parking Brake Apply
- Position: Driver Side
- Replaces: 18022582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Backing Plate Part Number: 18025206
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Backing Plate Part Number: 18025205
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Backing Plate, Rear Passenger Side Part Number: 18013525
Product Specifications
- Other Name: Plate, Rear Brake Backing (Right-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Backing Plate, Rear Driver Side Part Number: 18013524
Product Specifications
- Other Name: Plate, Rear Brake Backing (Left-Hand); Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Backing Plate, Passenger Side Part Number: 25990084
Product Specifications
- Other Name: Shield, Parking Brake Apply; Brake Dust Shield; Support Plate
- Position: Passenger Side
- Replaces: 18022583
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

Chevrolet Monte Carlo Brake Backing Plate

Want to cut long-term maintenance and repair costs? Choose OEM Brake Backing Plate. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Brake Backing Plate includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Brake Backing Plate is one of the key parts of Chevrolet Monte Carlo series that speaks volumes about the sturdiness and other characteristics of Chevrolet Monte Carlo vehicles series. This Brake Backing Plate is aimed at offering a shield to the disc brakes against dirt and rusting hence improving the braking system to its optimum level of safety and efficiency. Designed for the Monte Carlo car models manufactured before 2007, the Brake Backing Plate is compatible with the models of 1969 to 2007 including the modern ones. Its construction from corrosion resistant materials also increases the longevity of the brake components besides meeting the need of enhancing the outlook of the Chevrolet Monte Carlo. The Brake Backing Plate is available in the conventional one piece and the more recent two pieces versions whereby in the later one does not require a removal of the axle shaft. It is most advantageous for car owners who want a simple way of taking care of their Chevrolet Monte Carlo model. In the context of the automotive market, the Brake Backing Plate is easily recognizable because of its endurance and simple mounting while also shielding brake parts from dust. Thus, being shielding for the brakes and ensuring the blocks remain clean, the Chevrolet Monte Carlo Brake Backing Plate is a significant factor that positively contributes towards the effectiveness of braking in every Chevrolet Monte Carlo model, which makes it an indispensable part of the car's infrastructure.

Chevrolet Monte Carlo Brake Backing Plate Parts Questions & Experts Answers

Backing Plate, Driver Side
25990085
Q: How to replace the rear disc brake backing plate on Chevrolet Monte Carlo?
A:
You must lift the vehicle before starting work to access the disc Brake Backing Plate for replacement. To begin work on the brake system release the park brake pressure at the equalizer before removing the bracket and rotor at the rear. Unclip and take out the rear park brake cable from its bracket on the wheel. Also disconnect the park brake cable return spring from the park brake actuator and wheel bracket. The technician should take out all parts of the rear hub including the hub itself plus backing plate and park brake components as an assembly. The two retainers must come off along with the park brake cable bracket to release the park brake actuator. Place the entire rear hub assembly to the side afterward. Take out the Parking Brake Shoe and actuator unit from the back plate. First put the park brake actuator and shoe on the backing plate before you set the complete assembly over the hub. To complete the installation secure the two retainers and the park brake cable bracket first then fit the rear hub. Reattach the rear park brake cable to its bracket at the wheel base and snap the park brake cable return spring onto its positions at both the wheel base and park brake actuator. First put on the rear rotor then install the rear caliper bracket and lastly put on the rear wheels and tires at their appropriate positions. Set the park brake to its correct position at the equalizer before putting down the vehicle.